PPCGeeks
Page 36 of 36 « First 263435 36
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)
-   -   Post Your SDconfig.txt, provisioning.xml, etc. Files Here! (http://forum.ppcgeeks.com/showthread.php?t=59566)

sc00b4s7eve 10-28-2009 02:09 AM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
Quote:
Originally Posted by kernel610 (Post 1081318)
I can't seem to get my provisioning.xml file to work. Any suggestions? Also, what is the difference from doing the changes in a .reg file?

Also, I have it entered into my SDConfig file as "XML:\Storage Card\Install\Start\provisioning.xml"

EDIT: The random spaces in xml file are not in the original. I think it has something to do with it being in the QUOTES command



When I try opening the file with IE I get this error
"A name contained an invalid character. Error processing resource 'file:///C:/Documents and Settings/ksa/Desktop/provis...<characteristictype="HKLM\Software\HTC\Manila\Prog ramLauncher\0">"
-------------------^"
Then you gotta know IE is pointing you to your error, right? looks like you threw in that > too early so your formatting is off.
Try something like this. I put in one Reg Key, one String, and one # so you can see the difference. Hope this helps.
Code:
<wap-provisioningdoc>
<!-- *** COMMENTS *** -->
  <characteristic type="Registry">
      <characteristic type="HKLM\Software\HTC\Manila\ProgramLauncher\0" translation="filesystem">
        <parm name="Path" datatype="string" value="\Program Files\Resco\Resco Explorer.lnk" />
        <parm name="IsReadOnly" datatype="integer" value="0"/>
      </characteristic>
  </characteristic>
</wap-provisioningdoc>

Tannerj 10-31-2009 11:59 PM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
I have been working on this for a while now and I unable to figure out what I am doing wrong with my xml file.

XML File:

<wap-provisioningdoc>

<characteristic type="Registry">
<!-- Phone stay on when AC Power is applied -->
<characteristic type="HKLM\System\CurrentControlSet\Control\Power\ Timeouts">
<parm name="ACSuspendTimeout" value="0" datatype="Integer" />
</characteristic>
<characteristic type="HKCU\ControlPanel\Backlight">
<parm name="ACTimeout" value="0" datatype="Integer" />
<parm name="ACTimeoutUnchecked" value="60" datatype="Integer" />
</characteristic>
</characteristic>

</wap-provisioningdoc>


I have looked and looked but must be missing something. I am trying to disable the backlight when AC Power is applied.

any help would be greatly appreciated.

thanks... tannerj

JAAS 11-02-2009 08:41 PM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
Quote:
Originally Posted by kernel610 (Post 1081318)
I can't seem to get my provisioning.xml file to work. Any suggestions? Also, what is the difference from doing the changes in a .reg file?

Also, I have it entered into my SDConfig file as "XML:\Storage Card\Install\Start\provisioning.xml"

EDIT: The random spaces in xml file are not in the original. I think it has something to do with it being in the QUOTES command



When I try opening the file with IE I get this error
"A name contained an invalid character. Error processing resource 'file:///C:/Documents and Settings/ksa/Desktop/provis...<characteristictype="HKLM\Software\HTC\Manila\Prog ramLauncher\0">"
-------------------^"
There should be a space between characteristic and type... Fix it using notepad (Not XMLNotepad)

JAAS 11-03-2009 01:02 PM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
Quote:
Originally Posted by ryangruhn (Post 745748)
Things people are looking to put into their .xml files:

- Tasks – checking “Show start and due dates”
Didn't saw this one listed... Here's how I'm doing it. This will list only the active tasks, including the start/due date. Sorted by priority.


Code:

<!-- Task View Settings-->
<characteristic type="HKLM\SOFTWARE\Microsoft\Tasks\Reminder">
<parm name="Default" value="IP7//wAAAAABAAAAAAAAAAQAAAAAAAAAAAAAAHDyBAAAAAAAAAAAAA==" datatype="binary" />
</characteristic>
<characteristic type="HKLM\SOFTWARE\Microsoft\Tasks\Sort">
<parm name="Sort" value="AQAAABMAYAABAAAAkAMAAAAAAAk=" datatype="binary" />
</characteristic>
<!-- End Task View Settings-->

poonjahb 12-22-2009 06:09 PM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
Anyone ever have any luck importing s2u2 settings? I have my settings in an XML as shown below, my sdconfig seems to run it but the settings all get lost after the device reboots at the end.

Code:
<wap-provisioningdoc>
<!-- *** COMMENTO *** -->
  <characteristic type="Registry">
      <characteristic type="HKCU\Software\A_C\S2U2" translation="filesystem">
        <parm name="Autostart" datatype="binary" value="01"/>
        <parm name="PasswordLock" datatype="binary" value="00"/>
        <parm name="PasswordTime" datatype="integer" value="0"/>
        <parm name="LockNotification" datatype="binary" value="01"/>
        <parm name="AutoDismissNotification" datatype="binary" value="01"/>
        <parm name="ShowSMSPreview" datatype="binary" value="01"/>
        <parm name="ShowMMSPreview" datatype="binary" value="01"/>
        <parm name="ShowEmailPreview" datatype="binary" value="00"/>
        <parm name="AutoMarkReadSMS" datatype="binary" value="01"/>
        <parm name="AutoMarkReadEmail" datatype="binary" value="00"/>
        <parm name="BlankStart" datatype="binary" value="01"/>
        <parm name="IdleStart" datatype="binary" value="00"/>
        <parm name="OffLCD" datatype="binary" value="11"/>
        <parm name="BlankScreen" datatype="binary" value="00"/>
        <parm name="BlankOnTalk" datatype="binary" value="00"/>
        <parm name="InCallLock" datatype="binary" value="00"/>
        <parm name="ACBlankStart" datatype="binary" value="00"/>
        <parm name="ACIdleStart" datatype="binary" value="00"/>
        <parm name="ACOffLCD" datatype="binary" value="00"/>
        <parm name="ACBlankScreen" datatype="binary" value="00"/>
        <parm name="ACBlankOnTalk" datatype="binary" value="00"/>
        <parm name="ACInCallLock" datatype="binary" value="00"/>
        <parm name="DateFormat" datatype="string" value="dddd', 'd MMMM"/>
        <parm name="TimeFormat" datatype="string" value="H':'mm"/>
        <parm name="ClockPath" datatype="string" value="clock\"/>
        <parm name="Time2Format" datatype="string" value=""/>
        <parm name="Clock2Path" datatype="string" value=""/>
        <parm name="ShowAlarm" datatype="binary" value="01"/>
        <parm name="ShowTask" datatype="binary" value="01"/>
        <parm name="ShowMMS" datatype="binary" value="01"/>
        <parm name="ShowWeather" datatype="binary" value="07"/>
        <parm name="ShowOwnerInfo" datatype="binary" value="01"/>
        <parm name="DigitalBattery" datatype="binary" value="01"/>
        <parm name="ShowAppointment" datatype="binary" value="03"/>
        <parm name="AppointmentDays" datatype="binary" value="07"/>
        <parm name="ShowAllDay" datatype="binary" value="00"/>
        <parm name="AppointmentLine" datatype="binary" value="01"/>
        <parm name="AlignAppointment" datatype="binary" value="01"/>
        <parm name="AppointmentDateFormat" datatype="string" value="clock\"/>
        <parm name="AppointmentTimeFormat" datatype="string" value="h':'mmt"/>
        <parm name="CallerID" datatype="binary" value="00"/>
        <parm name="Slide2Answer" datatype="binary" value="00"/>
        <parm name="Slide2End" datatype="binary" value="00"/>
        <parm name="S2AAnsKey" datatype="binary" value="00"/>
        <parm name="S2AEndKey" datatype="binary" value="00"/>
        <parm name="PowerButtonEndCall" datatype="binary" value="01"/>
        <parm name="SendBusySMS" datatype="binary" value="00"/>
        <parm name="CanonicalFormat" datatype="binary" value="00"/>
        <parm name="CanonicalPrefix" datatype="integer" value="1"/>
        <parm name="VolumeControl" datatype="binary" value="00"/>
        <parm name="TransparentVC" datatype="binary" value="00"/>
        <parm name="NoVolumeKeyLock" datatype="binary" value="00"/>
        <parm name="InCallVolumeControl" datatype="binary" value="00"/>
        <parm name="Wallpaper" datatype="string" value=""/>
        <parm name="WallpaperL" datatype="string" value=""/>
        <parm name="ShowBattery" datatype="binary" value="01"/>
        <parm name="BatteryOnTop" datatype="binary" value="01"/>
        <parm name="GifSpeed" datatype="binary" value="00"/>
        <parm name="GifEndless" datatype="binary" value="00"/>
        <parm name="WallpaperChangeTime" datatype="binary" value="00"/>
        <parm name="WallpaperRandom" datatype="binary" value="00"/>
        <parm name="NoSoftKey" datatype="binary" value="00"/>
        <parm name="TopmostCurtain" datatype="binary" value="01"/>
        <parm name="TopCurtain" datatype="binary" value="01"/>
        <parm name="BottomCurtain" datatype="binary" value="01"/>
        <parm name="CurtainAlpha" datatype="binary" value="0f"/>
        <parm name="TextShadow" datatype="binary" value="00"/>
        <parm name="S2PControl" datatype="binary" value="01"/>
        <parm name="HPstartS2P" datatype="binary" value="01"/>
        <parm name="HPcloseS2P" datatype="binary" value="00"/>
        <parm name="NoS2P" datatype="binary" value="00"/>
        <parm name="S2PAlbum" datatype="binary" value="01"/>
        <parm name="LockSound" datatype="string" value=""/>
        <parm name="UnlockSound" datatype="string" value=""/>
        <parm name="SliderInertia" datatype="binary" value="00"/>
        <parm name="VibrationLED" datatype="binary" value="01"/>
        <parm name="HapticFeedback" datatype="binary" value="01"/>
        <parm name="VibrateOnConnect" datatype="binary" value="01"/>
        <parm name="DpadOn" datatype="binary" value="00"/>
        <parm name="UnlockOnRotate" datatype="binary" value="00"/>
        <parm name="ActionOnAC" datatype="binary" value="01"/>
        <parm name="StylusOutUnlock" datatype="binary" value="01"/>
        <parm name="StylusInLock" datatype="binary" value="00"/>
        <parm name="UnlockRunEXE" datatype="string" value=""/>
        <parm name="Unlock2Home" datatype="binary" value="00"/>
        <parm name="IgnoreScreenRotation" datatype="binary" value="00"/>
        <parm name="NoPowerSuspend" datatype="binary" value="00"/>
        <parm name="DisplayMode" datatype="binary" value="00"/>
        <parm name="KoreanSMSpatch" datatype="binary" value="00"/>
        <parm name="NoKeyBoardHook" datatype="binary" value="01"/>
        <parm name="NoManilaLock" datatype="binary" value="00"/>
        <parm name="NoSystemLock" datatype="binary" value="00"/>
        <parm name="ExceptionEXEisFG" datatype="binary" value="01"/>
        <parm name="WakeupDelayMS" datatype="integer" value="500"/>
        <parm name="BlankOnTalkDelayMS" datatype="integer" value="300"/>
        <parm name="DelayBootUpMS" datatype="integer" value="5000"/>
      </characteristic>
      <characteristic type="HKCU\Software\A_C\S2U2\Exceptions" translation="filesystem">
        <parm name="ExceptionEXE00" datatype="string" value="iexplore.exe"/>
        <parm name="ExceptionEXE01" datatype="string" value="VoiceCommander.exe"/>
        <parm name="ExceptionEXE02" datatype="string" value="AlarmPopup.exe"/>
        <parm name="ExceptionEXE03" datatype="string" value="SDDialer.exe"/>
        <parm name="ExceptionEXE04" datatype="string" value="HTCAlbum.exe"/>
        <parm name="ExceptionEXE05" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE06" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE07" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE08" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE09" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE10" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE11" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE12" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE13" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE14" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE15" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE16" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE17" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE18" datatype="string" value="wmplayer.exe"/>
        <parm name="ExceptionEXE19" datatype="string" value="wmplayer.exe"/>
      </characteristic>
      <characteristic type="HKCU\Software\A_C\S2U2\S2VEXE" translation="filesystem">
        <parm name="0File" datatype="string" value=""/>
        <parm name="0Parameters" datatype="string" value=""/>
        <parm name="1File" datatype="string" value=""/>
        <parm name="1Parameters" datatype="string" value=""/>
        <parm name="2File" datatype="string" value=""/>
        <parm name="2Parameters" datatype="string" value=""/>
        <parm name="3File" datatype="string" value=""/>
        <parm name="3Parameters" datatype="string" value=""/>
        <parm name="4File" datatype="string" value=""/>
        <parm name="4Parameters" datatype="string" value=""/>
        <parm name="5File" datatype="string" value=""/>
        <parm name="5Parameters" datatype="string" value=""/>
        <parm name="6File" datatype="string" value=""/>
        <parm name="6Parameters" datatype="string" value=""/>
        <parm name="7File" datatype="string" value=""/>
        <parm name="7Parameters" datatype="string" value=""/>
        <parm name="8File" datatype="string" value=""/>
        <parm name="8Parameters" datatype="string" value=""/>
      </characteristic>
  </characteristic>
</wap-provisioningdoc>

mikee4fun 01-17-2010 08:13 PM
Re: Post Your SDconfig.txt, provisioning.xml, etc. Files Here!
 
Can anyone point out the code I need. I am trying to make two different different signatures go to two accounts. One is Exchange and one is Gmail.

Any thoughts?


All times are GMT -4. The time now is 08:07 PM.
Page 36 of 36 « First 263435 36
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0