PPCGeeks - How To Flash Your Touch Pro

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA TP Development (http://forum.ppcgeeks.com/forumdisplay.php?f=68)

- - How To Flash Your Touch Pro (http://forum.ppcgeeks.com/showthread.php?t=43266)

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by razorloves (Post 913322)

lol...I know the steps for flashing. I need to know exactly what you are doing so that I can tell you where you're messing up. Stuff like what you are downloading, how you're extracting, how you rename and what program you're using, is your card formated to fat32? Help me help you.

The default format of the card is FAT, not FAT32. So I just stuck with it.
But I'm following the steps to the letter.
Extract ROM from install achieve. Rename, Copy to MicroSD 9make sure it's not in a folder), Hold down Power and Vol down and hit yes all at the same time after that I keep holding down power+vol-D and Wait for the screen to come up and it just sits there on the screen and does nothing.

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by Warboy (Post 913332)

I know by default it's FAT, that's why i told you FAT32. It will not work as FAT.

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by razorloves (Post 913343)

I know by default it's FAT, that's why i told you FAT32. It will not work as FAT.

I'll try it in abit to see if that's it.

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by Warboy (Post 913345)

I'll try it in abit to see if that's it.

It's not a matter of trying it. You have to have the card formated to FAT32 for it to work.

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by razorloves (Post 913355)

It's not a matter of trying it. You have to have the card formated to FAT32 for it to work.

Then you should make sure the first post says that >.>

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by Warboy (Post 913364)

Then you should make sure the first post says that >.>

Maybe you should learn to be a little more grateful. The first post is not mine to edit. And it's posted hundreds of times all over the place that it needs to be fat32. If you would have done a search for a few seconds, you would have seen that.
Have a nice day

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by razorloves (Post 913355)

It's not a matter of trying it. You have to have the card formated to FAT32 for it to work.

yup. gotta be FAT32 :D

Quote:

Originally Posted by Warboy (Post 913364)

Then you should make sure the first post says that >.>

easy now, lets not go pointing fingers !!! only the moderators or the OP can edit that into the first post ;-)

Quote:

Originally Posted by razorloves (Post 913372)

here's some posts from this very thread... :evil4:

Quote:

Originally Posted by flyers2114 (Post 564483)

Use the SD card make sure it is formatted to FAT32....rename the nbh file to RAPHIMG.nbh and enter bootloader and it should flash fine...

Quote:

Originally Posted by nemix (Post 588735)

Can someone edit the first post and say that the sd card has to be formatted in fat32 to work? I had to be for mine atleast...wouldn't work with the default card settings

Quote:

Originally Posted by ducylowycz (Post 633109)

Ok I think I figured out my problem with trying to flash via SD Card, and here is how I did it:

-512MB Card
-Inserted card into the phone
-Connected phone to PC as Disk Drive
-Formated card as FAT32 USING DEFAULT ALLOCATION TABLE

I really don't know if this is going to help anybody else HOWEVER this DID work for me, I was scratching my head trying to figure this out...I couldn't be happier!!! Let us all know how this works out for you people ( or don't )

Quote:

Originally Posted by Raging Idiot (Post 638148)

GZUS I just went though several pages of this to find out I needed to have my SD card formatted to FAT32. Well, it works now.... Very grateful for that.

I fried my USB in the name of science and no longer could charge or anything else, so this ROM install via SD card was a great benefit.

Someone should edit the first post and say the card needs to be FAT32.

Quote:

Originally Posted by puff (Post 774736)

did you format the card to FAT32?
here is another thread on the same subject

Quote:

Originally Posted by puff (Post 791883)

Yup. and btw make sure your card is formatted FAT32 :)

Re: How To Flash Your Touch Pro

I just want to thank razorloves for helping me through the process of try to flash my PRO through the sd card we have come to the conclusion that my sd card is not right for it I folled every step that razorloves has given me and the solution was that it was the card that it didnt like. I give big props to razorloves for the help through this. I going out on my next payday and getting me a new card that has the rating of 6 and going to try this one more time so razorlove I give you a standing ovation for this one and your help thank you very much. I have one other question. Will downloading a rom from your phone and running it from there make your phone a $300 paper wait? Can you do anything without a PC or do you sstill need some PC help? The reason I ask in case I get sent to some where like BFE and dont have access to a PC?:mrgreen:

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by kadukuchelu (Post 921210)

You do NOT need a PC, you can download, un-rar (if needed), and flash all day long without any computer. :)

Re: How To Flash Your Touch Pro

Quote:

Originally Posted by kadukuchelu (Post 921210)

thank you very much for the kind words kadukuchelu