Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Sorry if this has been covered in the 108 pages... but...

I'm sending my TP back for advance replacement (for a refurbished TP). The new one arrived, and it it's 0.40.0000. The original one was 0.37. The question I have is, if I have to return this new one to Sprint, and I relock it - will it relock as 0.40.0000 again, or will it be 0.37.0000?

And, will Sprint care that the loader screen is now older than the original 0.40?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

0.40 is the version for the latest sprint ROM, so if you have to reflash it for a return use SprintTouchProMR2.01.651.6

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

.37 relocker is the only one available, so once you unlock it, you will not be able to go back to the .40. Sprint will not care if you return it with the .37. And it won't matter if you flash the newest rom or either of the 2 old ones in the first post of the stock roms sticky thread. As long as it's locked and has a sprint shipped rom flashed via activesync, you're good to go.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

not doubting what you say, but my experience has been that the lock version for the sprint roms goes with the build. once you flash a specific sprint stock rom the lock version is changed to that build...

shipped rom .35
first updated rom .37
latest maintenance rom .40

that is why there has been unlock / relock issues with the latest release from htc and why you have to use SSPLManual to bypass the .40 lock

i may have it wrong, but like i said it seems that way to me

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I've never heard of a sprint phone with .35. I know .35 is the spl for verizon phones though. But I have flashed the shipped rom on around a hundred or more touch pro's and have helped numerous people on here and have never seen it relocked afterwards. cmonex spl has always remained after flashing the shipped rom. I'm not tryin to say you're wrong...just that this is what I've seen and read and experienced over the last year with the touch pro.

So what your're saying is, if you were to flash the newest sprint rom on your phone right now, it would change the spl from .37.cmonex to 0.40.0000?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

You have to run the relocker to get rid of the CMONEX... it just doesn't go back to the 0.40... but if no one ever got grief from Sprint over that, then I'm good with it too.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

if the phone is locked and you flash the htc maintenance rom recently released it changes the lock version to .40. that is the only way i have tested it. and i have gotten the lock version of .35 on my TP with the shipped rom from sprint.

i would test further, but have been working on a final 6.5.1 rom and will be moving to another device within the next month or so

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

ahhh....ok. gotcha. i'll have to see if that happens with me the next time i have a touch pro. I always just flash the shipped rom then lock it with the .37 relocker. Next time, I'll lock it, then flash the shipped rom again and see if it changes from .37.0000 to .40.0000. thanks for the info.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Guys...
I'm trying to relock my phone because I need to send it in to sprint. I installed the factory ROM - 3.27.4.3 (the file is called Hermann_C_SPRINT_WWE_1.03.651.4_RS1.03.15F_SPCS_1. 53_0909_PRL60613_Ship.exe) and then I ran the relocker, it showed the Boot screen and it says SPL-0.25.C-SSPL??? Everyone on here is talking about .37.000 and stuff...what am I doing wrong?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

you will see that when you use the SSPL Manual exe file to put it into bootloader mode. You have to do this:
with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Thanks a bunch it shows SPL-0.37.0000

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

ur welcome.
you're good to go then.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I just got a replacement TP (Verizon) - I was trying to load a ROM onto it using the same method as always .... however it kept telling me that there was communication problems. I can sync with Active Sync just fine. I then thought maybe this one was locked - however when at the boot loader screen it says security unlocked.

I was reading about a problem someone else was having - it was suggested that the phone needed to be locked and then unlocked again because of the version of spl that was on it. This version is SPL-0.40.0000

My problem is anytime I attempt to run the software from here ... http://forum.ppcgeeks.com/showthread.php?t=42503

It gives me an error that says "The application failed to intialize properly" then tells me to click ok to terminate. I cannot even get the application to launch ... the locker or the unlocker. Am I missing something or is there newer software out there ....?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Thank you!!!!!!!

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

it always says "Security Unlocked" on the bootloader screen. Pay no mind to that. You have to look at the spl version. 0.**.0000 means you're locked. 0.**.cmonex means you're unlocked. You have a verizon touch pro, so you have to use the verizon unlocker attached to the first post of this thread. You also have to read the entire first post so that you perform the preparations and instructions properly.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I had forgotten to download and install the .NET framework. As I said I use to do this all the time however forgot that I had formated my laptop since I did it last. SO I have that loaded now and am able to launch the program. I can sync my phone with no issues - however when I attempt to run the Verizon HSPL file (_035) and my phone is in boot loader mode it looks like it is going I get the status bar but it never moves from 0%. Then it tells me that it cannot talk to the phone and I have the option to "recover" which I have gone through. Is there something else I am missing? Again I have done this a million times without any problems - is there something new I don't know about ...?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Hmm. I just tried to relock my Telus TP using the attached relocker, but I think it bricked my phone. When I turn it on, this is all I get:

"Security Unlocked RUUNBH
RAPH800
SPL-0.37.0000
MicroP-Hermann (LED) v0C85
MicroP-Hermann (KEY) v0C85
PSOC-Raph STAGE_EVT v20
Upgrade ROM code error
Please try again"

If I have my SD card in (which I tried to use to unlock it), it goes to a screen that says "Loading..." but never moves. If I try to connect via the Update Manager (which never worked before, hence my using the SD card), it goes to the transfer screen and just stays stuck at 0% until it lists ERROR 262: UPDATE ERROR. Recovering via the update manager never works.

Any thoughts?

Note: I am unable to get any OS's on the phone, so I can't re-unlock it via SD (or can I?) not can I establish an activesync connection with it. I also flashed the stock rom before unlocking.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

try this. click start-settings-connections-usb to pc, then uncheck or check the box under Activesync. Then try it again

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

i can't load anything on my phone... it just automatically goes into the boot loader =\

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

that is a common problem. since you locked via SD card, you should look at the sd card locking thread. it explains your problem and what to do in the first post. http://forum.ppcgeeks.com/showthread.php?t=61333

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I can't flash anything because it is locked (at least I think so based on the spl version), but I can't unlock it because I can't put SSPL on the main memory of my phone....

=Brick?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Alright, here's what I've tried:

Unlock ROM on SD card -> "Loading..."
Lock ROM on SD card -> "Loading..."
Stock ROM on SD Card -> "Loading..."

Unlock RUU via USB from bootloader -> Hangs at 0%
Stock RUU via USB from bootloader -> Hangs at 0%
Relocker RUU via USB from bootloader -> Hangs at 0%

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Ooh nice. I got it to boot finally using something called MTTY, which seems like a telnet connection over USB that allows you to send commands to the boot manager.

http://wiki.xda-developers.com/index..._at_bootloader

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

you are confused.
the upgrade rom code error is a common problem. all you have to do is read that thread and it tells you how to fix it. if you have problems fixing it, then post in that thread.
you just have to flash the shipped rom and you'll be good to go.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I might be confused, but I was unable to flash anything. Regardless, now that's it's booted I'm sure I'll be able to get it working by re-unlocking and then flashing. Thanks for the info.

Edit: Ah! I was trying to relock my Telus touch pro so that I could get warranty work done. So, I flashed the stock rom and flashed the relocker. However, the Telus stock rom on on this website isn't signed so you need to be unlocked to run it. That's unfortunate, because I think it means that people on Telus and Bell can't relock their phones to get warranty work done =\. If I'd known that, I don't know if I would've unlocked my phone in the first place...

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

i have a touch pro from altell im sending back . they already sent me my new one and then im suppose ship back the busted one , should i even bother relocking it?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

yes. always.
flash the shipped rom, then relock

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Hello all .. i have a problem .. i have Net. fram intalled and windows mobile 6.1 on my com .. but when i go to flash or unlock i get [error260] staying that i need to check my conection .. ther is nothing wrong with my conection ! i cannot unlock my new phone !!! please help .. i am working with the Sprint touch pro ..

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I'm trying to get my Sprint Touch PRO back to the stock ROM. I've read through about 50 pages of this thread and this subject has come up several times. So I want to explain the steps I've taken (I think I'm missing one) and then tell you what the current condition of my phone is.

I ran the relocker from the original post since I read in a later post that it contains the OEM Rom. I was connected with Windows Mobile Device Center and ran the relocker. Everything started up on the PC and phone just fine and went through the entire process and then rebooted the phone. I immediately noticed on reboot that it still says Mighty Rom prior to the Windows Mobile green startup screen comes on. I then put the phone into the bootloader screen and this is what my phone showed:
Security Unlocked
Raph800
SPL-0.37.0000
MicroP-Hermann (LED) v0c85
MicroP-Hermann (key) v0685
PSOC-Raph Stage_EVT v20

Using the WMDC I removed the theme that I had installed which brought the factory black and white back, but it looks like the digital clock from the theme stayed.

So did I miss a step, and if so please tell me which what I need to do and what file I need. I'm assuming I missed something if the Mighty Rom is still showing up.

Thanks in advance.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

You can just reflash the original sprint ROM

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

@patrick78 - yea...you just need to flash the shipped rom, like hibby said. here's a link http://www.htc.com/us/SupportDownloa...at=2&dl_id=683

in the future, whenever you have to return a phone, and you've unlocked it and flashed roms or radios, then all you do is flash the shipped rom then relock it. that's it.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

try this. click start-settings-connections-usb to pc, then uncheck the box under Activesync. then try to unlock it again.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I just want to confirm something for the relocker that I read in a previous post. Even after the relocker has been run, when you put the phone in the bootloader screen, it will still say Security Unlocked at the top of the screen?
I can't recall what it said way back when I originally modded the phone. I just want to make sure everything is as it should be before I go into the Sprint store with it.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

It always say that. regardless of locked or unlocked or brand new. just ignore it.
The spl version is what tells you if it's locked.
0.XX.0000 = locked
0.XX.cmonex = unlocked

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

I have a quick question.
mine gets locked up at 0%, no matter what i do.
I have tried to uncheck the checkbox under USB connection setting, did not work
I also tried running SSPLManual_Raphael from the phone , but it locks up.
The only difference I saw was when the bootlooder screen comes up it says
SPL-0.63.0000
This is a Sprint CDMA HTC Touch Pro 2 Phone .
Please advice

Thanks in advance

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

look at the section of the forum you're in right now. this is the Touch Pro section.

here is where you want to be http://forum.ppcgeeks.com/showthread.php?t=78887

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Looking for the stock 6.5 upgrade rom for TP. any assistance?

I had spb 3.5 installed and 6.1 and I erased it and now my phone won't go back to the home screen, I get some reminder screen.

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

there is no stock 6.5 upgrade. only 6.1 here http://www.htc.com/us/SupportDownloa...at=2&dl_id=683

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

Hey i just got my replacement phone from U.S. Cellular and notice that the replacement has a spl of .40 and i have relocked my old phone to the .37. Will this make any difference when returning my phone under warranty or what should i do?

Re: Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team
 

no need to worry. relocking with .37 will be fine.