Originally Posted by ppatel87 (Post 1377748)

Hi guys.. I recently switched over to this rom.. I really like it.... But I'm experiencing a lot of lagging when I try to REPLY to any text messages that come in. I have to wait for a while for the curser to blink in the message screen. Any fixes out there? Anyone else having the same problem? PLease help!

Originally Posted by omnicronx (Post 1377721)

confirmed ;) default is opera 10..
As for your cache question, I think right now its not configurable*, its happens to be wherever you installed opera. It is possible to install Opera on your storage device if you want too(with then end result being your cache is located on your storage device too).. I'm sure if you can find one here or on XDA. If there is not I can cab it up as I am sure you are not the only one asking that question.

Originally Posted by OMJ (Post 1377978)

Originally Posted by OMJ (Post 1377909)

which one? I have 4 posted...on my 28002, not seeing any lag

Originally Posted by ppatel87 (Post 1378015)

I experience the lag on the 11/23 update, which was the 28002 i believe. I have not yet updated to the 11/30 update... would this alleviate the problem?

Originally Posted by OMJ (Post 1377978)

Ok, 28002 v1.2 has been repackaged & uploaded...

Originally Posted by billyapd21 (Post 1378242)

so do we just take out one of the = and we're all set?

Originally Posted by OMJ (Post 1377938)

ok, attached is a cab to update messaging to v1.50, follow these instructions:

1) disable sense
2) delete \Windows\ManilaFull.xml
3) install the cab
4) reboot, just to be safe
5) enable sense

Originally Posted by qwho (Post 1376957)

This will let you get around that exchange policy. Just unzip and run it from storage (I keep it there for every time I set up exchange) and uncheck the boxes. Then all you have to do is change your lock settings from the settings menu.

Every once in a while (it happened once since I have been using this) when you sync exchange it will force the policy again, just run this app again.

With this rom there is an issue with the pin settings, it says failed to save lock settings, or something like that... but it still works.

Originally Posted by tlittell (Post 1378375)

Running 23504 and when I add a new contact it doesn't give me an option to store as 'First, Last', it defaults to 'Last, First'. My imported contacts are store "First, Last'. Looked at all the contacts option, unless I'm missing it. Any ideas? Is this a WM 6.5 thing?

Originally Posted by tlittell (Post 1378375)

Running 23504 and when I add a new contact it doesn't give me an option to store as 'First, Last', it defaults to 'Last, First'. My imported contacts are store "First, Last'. Looked at all the contacts option, unless I'm missing it. Any ideas? Is this a WM 6.5 thing?

Originally Posted by billyapd21 (Post 1378506)

how do you get the winter animated wallpaper to work? I don't see it available.

Originally Posted by Vancer (Post 1378419)

HTC Messaging doesn't give you that option in and of itself... you have to go all the way to the bottom and hit "more". This will launch the native WM client where you can change to First, Last. So you can enter most of the info in the HTC Messaging client if you want then just open the native to change that with the more button.

Originally Posted by mmmdieselfumes (Post 1378449)

Had this problem a long time ago when I imported all my contacts it flipped em all to "last, first" and it drove me crazy! Anyways, I found this little program. I used it with the shipped sprint 2.00 rom, but hopefully it'll still work for you.

Originally Posted by OMJ (Post 1378547)

go to animated wallpapers, select the middle one....the thumbnail was not changed.

Originally Posted by billyapd21 (Post 1378586)

Do you know how to get back to the default wallpaper?

Originally Posted by OMJ (Post 1377909)

hmmm, did u check them last night too?

Originally Posted by OMJ (Post 1377187)

not sure on the phone pad, I havent tried

VC works

if u install the sprint cab, profile/prl should work

Originally Posted by Vancer (Post 1377631)

Yeah, this happens with all the ezinput 2.x and higher that I have seen. I use the fix posted earlier to get the phone keypad up and running which is what i use. As a side note, the full qwerty will pop up from time to time when your cursor is in a password field but it goes back to phone keypad after.

I have taken a look at the app.reg of the newer ezinputs vs. the older 1.5 versions and see some differences. The problem is that the newer ones don't have a reg key IsSipInputMethod for anything other than the Full Qwerty... The problem is I don't know which CLSID is for "phone keypad" and "compact qwerty" or I think I may be able to get this problem fixed because it bothers the hell out of me too!!! Maybe I'll spend some more time on it.

Originally Posted by mlin (Post 1378843)

Hey OMJ, here is the xperia x2 task manager I was referring to. It works well with th 6.5.x builds and finally brings multitasking to 6.5.x. NRG uses it in his ROMs which is where I found it but I am switching back to your ROM for stability reasons. I hope that v1.2 is as solid as was v1.1. I'll let you know soon. :mrgreen:

Attachment 50592

Attachment 50593

Attachment 50594

Originally Posted by mlin (Post 1378843)

Hey OMJ, here is the xperia x2 task manager I was referring to. It works well with th 6.5.x builds and finally brings multitasking to 6.5.x. NRG uses it in his ROMs which is where I found it but I am switching back to your ROM for stability reasons. I hope that v1.2 is as solid as was v1.1. I'll let you know soon. :mrgreen:

Attachment 50592

Attachment 50593

Attachment 50594

Originally Posted by tlittell (Post 1378585)

Vancer, that did the trick thanks.

Originally Posted by av8or (Post 1378818)

thanks


do you mean like the hex code for the different sips? i'd found those once (in an effort to change the registry to enable the phone pad on juicy8, it did, could also force it to compact qwerty, but in both instances any key press just brought up the particular keys numeric value rather than the letters)
this isn't the same thing i found before but it is a reference part way down the page and its for wm5 so not sure how valid it is anymore i know its not the same 4 number code i was changing before
another older reference

here's somethign that might help these codes look familiar to me
HKLM/Software/HTC/ezsip/CurrentSIP

Originally Posted by mlin (Post 1378843)

Hey OMJ, here is the xperia x2 task manager I was referring to. It works well with th 6.5.x builds and finally brings multitasking to 6.5.x. NRG uses it in his ROMs which is where I found it but I am switching back to your ROM for stability reasons. I hope that v1.2 is as solid as was v1.1. I'll let you know soon. :mrgreen:

Attachment 50592

Attachment 50593

Attachment 50594

Originally Posted by kbussen (Post 1379068)

I am loving 21870 V1.6. I have one question, when i press the home key from any tab, it doesnt return me to the home tab, it just stays on the current tab. Is this a reg key?

Originally Posted by Vancer (Post 1379022)

Anytime! ... OMJ really has the good going around :mrgreen:



No i use this reg...
HKLM\Software\HTC\ezsip
change "BioToShowMenu" DWORD=1 (this will force the sip menu so you can change to phone keypad) (the dword defaults back to 0 but the phone keypad stays)

And yes it functions properly with ABC, and XT9

As far as the other, no i didn't mean HEX Code... Here's what i was talking about...

This is a part of the app.reg for the SIP - EzInput 1.5.32437.0 EXT

-----
REGEDIT4
[HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}]
@="Phone Keypad"
[HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}\DefaultIcon]
@="\\Windows\\ezinput.dll,0"
[HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}\InprocServer32]
@="\\Windows\\ezinput.dll"
[HKEY_CLASSES_ROOT\CLSID\{198D503A-EFFE-4afd-BC54-EED333C80E6D}\IsSIPInputMethod]
@="1"
[HKEY_CLASSES_ROOT\CLSID\{62B00599-25D2-4e09-8C48-03BF26DB8517}]
@="Compact QWERTY"
[HKEY_CLASSES_ROOT\CLSID\{62B00599-25D2-4e09-8C48-03BF26DB8517}\DefaultIcon]
@="\\Windows\\ezinput.dll,0"
[HKEY_CLASSES_ROOT\CLSID\{62B00599-25D2-4e09-8C48-03BF26DB8517}\InprocServer32]
@="\\Windows\\ezinput.dll"
[HKEY_CLASSES_ROOT\CLSID\{62B00599-25D2-4e09-8C48-03BF26DB8517}\IsSIPInputMethod]
@="1"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4c36-ABDE-204885471FEE}]
@="Full QWERTY"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4c36-ABDE-204885471FEE}\DefaultIcon]
@="\\Windows\\ezinput.dll,0"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4c36-ABDE-204885471FEE}\InprocServer32]
@="\\Windows\\ezinput.dll"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4c36-ABDE-204885471FEE}\IsSIPInputMethod]
@="1"

----

Look at the parts i bolded, these are present in the 1.5 version of ezinput and why they show up on the sip menu. The problem with the 2.x and newer ezinput is that these regs aren't present in the app.reg

Here is part of the 2.x app.reg...

-----

REGEDIT4
[HKEY_CLASSES_ROOT\CLSID\{42429667-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{3A20A6B0-E476-44F7-A12E-ECA335F6D52C}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{20BEAB7D-DA92-4D85-AE18-8BCDD10DDF0C}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{615623E0-A400-11D1-8910-0000F81EA21F}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{CD75C2B1-B10A-4430-8A2E-C124C42F6060}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{1FE8DF43-1EF4-4575-8695-D8B39A10BCEE}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{9D30D4D0-A261-11D1-890F-0000F81EA21F}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{717208D0-A932-11D1-8912-0000F81EA21F}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{2F9BC385-098C-430C-B6D4-BFFE17761189}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{B29FCEEB-BA48-40E7-BD82-776F70C28E5D}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{FD270799-1765-4C4B-892F-D9554AA13C26}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{4C08EF90-AA51-11D1-8912-0000F81EA21F}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{2609ECFB-4ED8-444B-80FE-C77623CB590A}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{29C68B2D-8A9C-4600-8C18-7E2F4E1CA3D0}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{A9BC9200-AAE8-11D1-8912-0000F81EA21F}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{42429690-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{F0034DD0-2AD4-11d1-9CB0-E84BE8000000}\IsSIPInputMethod]
@="0"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4C36-ABDE-204885471FEE}]
@="Full QWERTY"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4C36-ABDE-204885471FEE}\DefaultIcon]
@="\\Windows\\ezinput.dll,0"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4C36-ABDE-204885471FEE}\InprocServer32]
@="\\Windows\\ezinput.dll"
[HKEY_CLASSES_ROOT\CLSID\{36BC8FF6-8241-4C36-ABDE-204885471FEE}\IsSIPInputMethod]
@="1"
[HKEY_LOCAL_MACHINE\Software\HTC\ezsip\SIPItemName]
"SIPItemName0A"="Phone Keypad"
"SIPItemName0B"="Compact QWERTY"
"SIPItemName0D"="Full QWERTY"

-----

So they changed something and the problem is that in the CLSIDs above, I don't know which ones (if any) are tied to the "Phone Keypad" and "Compact QWERTY" in order to enable IsSIPInputMethod=1. As you see in the 1.5 version you can tell which CLSID is associated with each keyboard.

If you trial and error it and one of them work let me know

Hope that helps

BTW, I'm a CR2 dirver for ASA, how bout you?

Originally Posted by billyapd21 (Post 1379450)

the same thing happened to me. try a soft reset, it fixed the problem for me!

Originally Posted by mlin (Post 1378843)

Hey OMJ, here is the xperia x2 task manager I was referring to. It works well with th 6.5.x builds and finally brings multitasking to 6.5.x. NRG uses it in his ROMs which is where I found it but I am switching back to your ROM for stability reasons. I hope that v1.2 is as solid as was v1.1. I'll let you know soon. :mrgreen:

Attachment 50592

Attachment 50593

Attachment 50594

Originally Posted by kbussen (Post 1379068)

I am loving 21870 V1.6. I have one question, when i press the home key from any tab, it doesnt return me to the home tab, it just stays on the current tab. Is this a reg key?

Originally Posted by billyapd21 (Post 1379450)

the same thing happened to me. try a soft reset, it fixed the problem for me!

Originally Posted by billyapd21 (Post 1379450)

the same thing happened to me. try a soft reset, it fixed the problem for me!

Originally Posted by OMJ (Post 1379547)

funny u should mention. I searched after you asked about the task mgr. found one @ xda, installed via cab but it was acting funny. Mystery has it in his rom, so he gave me the pkg, I cooked a rom last night with it....it's seems pretty nice, and will be in my future 6.5.x roms.....thx



have u tried to soft reset? I've seen this in the past but not lately



lol, took the works outa my mouth