Originally Posted by psyko_chewbacca (Post 401473)

Hi, when will the package to revert to the stock SPL will be posted, I will have to return my touch diamond to telus to get a new one and even if I only give it back and they don't check it I don't want to screw this up!

Originally Posted by htcp4000telus (Post 404821)

Can someone provide a brief description of what this exactly does? thanks for everyone's patience!

Originally Posted by dani190 (Post 405358)

so would you guys say this is worth it? Like what am i gaining by doing this?

Also do i just follow the instructions in the first post and thats all?

Originally Posted by dani190 (Post 405358)

Also do i just follow the instructions in the first post and thats all?

Originally Posted by O'Neil Mitchell (Post 407037)

Does anyone know where i can find a Diamond re-locker just incase

Originally Posted by tobeychris (Post 407041)

Did you read the thread you just posted in?

I also already answered your query in another thread AND added it to the stickied tutorial.

Originally Posted by chokkan (Post 415060)

Hi Guys Yesterday night I tried to unlock my touch and this is the story.Unlocked the phone seems OK
2-Tried to downlod the rom 1.08
3- was not able to when in the % was not starting to download.
4-Though it was not unlocked;retried to unlock
5- Retried to download Rom1.08 and now it was downloading until I arrived at 81% at thattime received error 302
6-Now when I open turn on the phone I see The touch Diamond with all the little red info at the bootom but it is not booting;like if i dont have a complete ROM downloaded.

7- Now i made a reset and i am back in the bootloader and this is what I see

Securyty unlocked

Diam500
SPL-0.57.000
MicroP-Diam (Led) vB
Psoc-DiamStage_EVTv20

Serial

Can somebody with great knoledge Help me PLease I am really Stocked

Thanks in advance

Originally Posted by cmonex (Post 395438)

yeah, HardSPL for CDMA Diamond is ready, just need to package it up into a userfriendly package. will do that in the evening.
edit: scroll down, it is done :D

though, I must mention, rebasing the SSPL was a real hard task, the GSM diamond was easier in some ways (and in others, not - anyway, you can get GSM version at xda-devs)...

there will be two HSPL's.

1. 0.43.MFG for the hackers, because otherwise, it is too old, apparently has screen issues in WM, which is easily fixed by a power off / on (suspend / resume) cycle. but it has mw, it has rtask, has lnbh, etc. etc. :D

2. 0.57 for other people, this has no screen issues.

(the SSPL is based on 0.43.)

thanks to tobeychris for testing. :D and it was fun to work with no2chem!

so stay tuned... & here are some photos until then...


***************************

UPDATE: HardSPL is released... now!

thanks to tobeychris and ghettofreeryder for testing!

Instructions:

0) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the DiamondC_HSPL057.zip unless you want to tinker with MFG SPL.
3) you must Have Phone Synced with PC in Windows Mobile!
4) run DiamondC_HSPL057.exe (or maybe 043, if you want to experiment with MFG SPL),
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say SSPL0.43.CMONEX.
7) SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.57.CMONEX (or 0.43.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.



NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.


NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted.


NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the HardSPL.



finally, if you somehow wish to thank me with a donation, you can: click here :)

enjoy!

Originally Posted by cmonex (Post 395438)

yeah, HardSPL for CDMA Diamond is ready, just need to package it up into a userfriendly package. will do that in the evening.
edit: scroll down, it is done :D

though, I must mention, rebasing the SSPL was a real hard task, the GSM diamond was easier in some ways (and in others, not - anyway, you can get GSM version at xda-devs)...

there will be two HSPL's.

1. 0.43.MFG for the hackers, because otherwise, it is too old, apparently has screen issues in WM, which is easily fixed by a power off / on (suspend / resume) cycle. but it has mw, it has rtask, has lnbh, etc. etc. :D

2. 0.57 for other people, this has no screen issues.

(the SSPL is based on 0.43.)

thanks to tobeychris for testing. :D and it was fun to work with no2chem!

so stay tuned... & here are some photos until then...


***************************

UPDATE: HardSPL is released... now!

thanks to tobeychris and ghettofreeryder for testing!

Instructions:

0) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
1) download Hard-SPL package from attachment, extract to an empty folder.
2) it is recommended you download only the DiamondC_HSPL057.zip unless you want to tinker with MFG SPL.
3) you must Have Phone Synced with PC in Windows Mobile!
4) run DiamondC_HSPL057.exe (or maybe 043, if you want to experiment with MFG SPL),
5) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
6) it should go to tricolour screen now and say SSPL0.43.CMONEX.
7) SPL flashes, device automatically reboots, job done.
8 ) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.57.CMONEX (or 0.43.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.



NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.


NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted.


NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the HardSPL.



finally, if you somehow wish to thank me with a donation, you can: click here :)

enjoy!

Originally Posted by goknis (Post 423719)

Hi buddy.. i did that you said, but now ,my pda dosnt open even ..what i shoul do...please help!!!

Originally Posted by puff (Post 423908)

can you please provide more details on what you did, rather that quoting the entire guide (twice none the less)? when you enter bootloader (press and hold the volume down button along with the power button, then press the reset button) screen what appears?

Originally Posted by goknis (Post 423998)

i loaded this morning.while upload this program by PC, it s appaers at pda screen ' do you want to load " EnterBootloader.exe" somethings...' and i tapped 'yes' and screen turned to black.then it never worked one more... nothing appears at screen after tried what you said,..by the way it s a 'touch' diamond..

Originally Posted by goknis (Post 424055)

yes i tried but it wasnt work

Originally Posted by toinejuan (Post 424054)

Is this unlocker going to work for the Pro or are we going to have to wait for a dump from the official rom before we see an unlocker?

Originally Posted by puff (Post 424198)

weird. hard reset? i dont know what you did wrong, but it dont look good...

Originally Posted by cmonex (Post 424938)

he probably flashed it to GSM diamond - I can see he skipped answering that question.

Originally Posted by Schwartz (Post 426753)

My Sprint Diamond Is Security Unlocked And I Never Touched IT. SPL 0.57.0000