Re: [TESTING] - NAND OMGB (1.2.3)
 

Today about 9am I flashed your new release (16/01/2012). Till now (10pm same day) I must connected my phone to charger twice already. My power from battery is about 6 hours per one charge. This is about 4 hours less then previous build. I'm using my phone with the same settings, same apps and with same intenzity as the previous build. I have been already tried battery calibration. Sleeping my phone indicated with green LED is OK, as I expected. My question is: were some changes in this new build which are affected consumption or is my battery definitively dead? Thanks.

Re: [TESTING] - NAND OMGB (1.2.3)
 

I just tried the bluetooth with my bluetooth speakphone and the same thing happened as huckl3b3rry. ill try again and try and grab logs. what command should i run?

Re: [TESTING] - NAND OMGB (1.2.3)
 

Just use the GetLogs app. Makes things much, MUCH easier.

http://xdandroid.com/wiki/Logs

Recreate the issue, use GetLogs, win.

Re: [TESTING] - NAND OMGB (1.2.3)
 

Without the GPS library I'm not sure it would matter, but GApps for OMGB defaults to having GPS on for location. I would turn it off just to be sure.

Re: [TESTING] - NAND OMGB (1.2.3)
 

This is the first setting what I doing turn off after fresh install :-) My GPS is off for sure, I only have checked Mobile network locations check-box.
One note to this: I'm using minigaps (only Android Market) from Rhodium project nand web. But I'm not sure if this is important info :dontknow:

Re: [TESTING] - NAND OMGB (1.2.3)
 

for some reason i could get the getlogs to give me a file or Pastebin address. so i have attached the file from adb shell dmesg > dmesg.txt this command

edit - i hope this is the right stuff

Muziling had mentioned to ACL about a battery hack he found, ACL said that he would release it on next build don't know if he did on this build...correct me if I'm wrong!

Sent from my Touch Pro 2 using Tapatalk

Re: [TESTING] - NAND OMGB (1.2.3)
 

Nice build, easily installed.

While getting everything setup for more thorough integrated testing, I have found myself unable to get MMS working with the android messaging application.

I started with the normal edits to APN, which failed to work. I reset APNs to default and then performed the build.prop edits, followed by the standard APN edits, which also failed to work.

Has anyone had good results with the 1/16 build, Sprint network and the standard Android messaging application?

<edit>
I went through the process again, ensuring that I started with default APN settings and it worked this time. Happy camper. Sorry for the false alarm.
</edit>

Best regards,
-boggsie

Probably had to reset for changes to take effect?

Sent from my Touch Pro 2 using Tapatalk

Without the build.prop edits?

Sent from my Touch Pro 2 using Tapatalk