PPCGeeks
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   [TESTING] .39 Kernel **NEW** (http://forum.ppcgeeks.com/showthread.php?t=144366)

xddy 06-21-2011 12:48 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by arrrghhh (Post 2117472)
Well the first two boots, no clue. Third boot, sounds like you're running an image without the new acoustic changes. Stick to .27 kernels unless you have a system image that has the new acoustic stuff.
Thanks for your reply. But still sort of confused. How to get the system image with new acoustic stuff?

UPDATE: replaced the .39 module with the .27 one, same here.

highlandsun 06-21-2011 07:12 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by docnas (Post 2117450)
hyc = sneaky bastard :twisted: =D> i had to tab to the link, for the life of me i couldnt find it
Just making sure you *really* wanted it... ;)

arrrghhh 06-21-2011 11:07 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by xddy (Post 2117487)
Thanks for your reply. But still sort of confused. How to get the system image with new acoustic stuff?

UPDATE: replaced the .39 module with the .27 one, same here.
Wha? Don't swap modules. That's useless, you'll just end up breaking things like wifi. No one told you to swap around modules - they are closely tied to the kernel, so they much complement eachother.

xddy 06-21-2011 10:48 PM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by arrrghhh (Post 2117628)
Wha? Don't swap modules. That's useless, you'll just end up breaking things like wifi. No one told you to swap around modules - they are closely tied to the kernel, so they much complement eachother.
So, how to get this kernel (or any other) working? any instruction available? Thanks.

arrrghhh 06-22-2011 08:59 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by xddy (Post 2117988)
So, how to get this kernel (or any other) working? any instruction available? Thanks.
Stick to the autobuild service. This thread assumes you know how to replace a kernel, so if you don't read Incremental Updates. These kernels are for testing, and assume you know what you're doing. If you don't, please don't use them.

xddy 06-22-2011 03:55 PM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by arrrghhh (Post 2118142)
Stick to the autobuild service. This thread assumes you know how to replace a kernel, so if you don't read Incremental Updates. These kernels are for testing, and assume you know what you're doing. If you don't, please don't use them.
Thank you very much!

Update: one more question. I read through the FAQ for xdandroid project, it says

"there's an additional bug that is RHOD400/500 specific (worldphone in GSM mode only!!!) - if you are using a kernel after 1253 (aka 20110210_213850) the radio will shut off with the screen, causing missed calls, messages, etc. Stick to 1253 if you're using a RHOD400/500 worldphone as a GSM device until the issue is resolved. "

It seems the 20110210_213850 is kind of old. I'm using the sprint tp2, so, what is the newest kernel without this issue I should use ? Thanks.

fishingmedic 06-23-2011 11:01 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by xddy (Post 2118311)
Thank you very much!

Update: one more question. I read through the FAQ for xdandroid project, it says

"there's an additional bug that is RHOD400/500 specific (worldphone in GSM mode only!!!) - if you are using a kernel after 1253 (aka 20110210_213850) the radio will shut off with the screen, causing missed calls, messages, etc. Stick to 1253 if you're using a RHOD400/500 worldphone as a GSM device until the issue is resolved. "

It seems the 20110210_213850 is kind of old. I'm using the sprint tp2, so, what is the newest kernel without this issue I should use ? Thanks.
I don't know about for the .39 kernels, but I believe 1327 in the autobuild for .27 kernels may have a fix from HYC for 400/500 fixing that. I haven't tried it, but it might help.

arrrghhh 06-23-2011 11:34 AM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by xddy (Post 2118311)
Thank you very much!

Update: one more question. I read through the FAQ for xdandroid project, it says

"there's an additional bug that is RHOD400/500 specific (worldphone in GSM mode only!!!) - if you are using a kernel after 1253 (aka 20110210_213850) the radio will shut off with the screen, causing missed calls, messages, etc. Stick to 1253 if you're using a RHOD400/500 worldphone as a GSM device until the issue is resolved. "

It seems the 20110210_213850 is kind of old. I'm using the sprint tp2, so, what is the newest kernel without this issue I should use ? Thanks.
Quote:
Originally Posted by fishingmedic (Post 2118684)
I don't know about for the .39 kernels, but I believe 1327 in the autobuild for .27 kernels may have a fix from HYC for 400/500 fixing that. I haven't tried it, but it might help.
For the record, emwe fixed it. Also yes, the newest .27 autobuild has this fix in it. I have no clue if this bug effects .39, but that reminds me... I need to update the FAQ!

fishingmedic 06-23-2011 12:31 PM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Quote:
Originally Posted by arrrghhh (Post 2118715)
For the record, emwe fixed it. Also yes, the newest .27 autobuild has this fix in it. I have no clue if this bug effects .39, but that reminds me... I need to update the FAQ!
Sorry about giving the wrong credit :mrgreen:

xddy 06-23-2011 01:16 PM
Re: [TESTING] .39 Kernel **NEW** 6/7/11
 
Any kernel can make the 3.5mm headphone jack work on Sprint TP2 so far? I'm curious about it.


All times are GMT -4. The time now is 10:16 PM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0