PPCGeeks
Page 53 of 274 « First 3435152 53 545563103153 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery (http://forum.ppcgeeks.com/showthread.php?t=134598)

pts69666 11-30-2010 12:09 AM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
herm... it looks like i have a boot loop... mdp_dma: busy is what it keeps ending at...
---------
edit:

ok, i formatted SD card and re-copied files and it loaded.

Boot-up animation is a little glitchy. When it loads sometimes between frames, it will show a blur in the lower right hand corner of screen. Menus are a little slow and unresponsive, but it is much better than when I used it last.

installing angry birds now to see what everyone is crazy about. i love how that is the sole judge on how well android works on this device xD

[ACL] 12-02-2010 04:36 AM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Nate: i need some haret help again.

when you have a chance, can you dump the contents of the addresses below with panel on and then off?

0xBA08150C
0xBA081510
0xBA0811D4

[ACL] 12-02-2010 04:53 AM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Quote:
Originally Posted by pts69666 (Post 2004406)
herm... it looks like i have a boot loop... mdp_dma: busy is what it keeps ending at...
---------
edit:

ok, i formatted SD card and re-copied files and it loaded.

Boot-up animation is a little glitchy. When it loads sometimes between frames, it will show a blur in the lower right hand corner of screen. Menus are a little slow and unresponsive, but it is much better than when I used it last.

installing angry birds now to see what everyone is crazy about. i love how that is the sole judge on how well android works on this device xD
Sorry it looks like my autobuild script broke and the latest fix wasnt compiled. Download the latest version and gain and the glitch should be gone.

coolsilver 12-02-2010 12:22 PM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Quote:
Originally Posted by [ACL] (Post 2005781)
Sorry it looks like my autobuild script broke and the latest fix wasnt compiled. Download the latest version and gain and the glitch should be gone.
Downloaded the latest from the autobuild site.

Boot animation still very much glitchy as with the build from nate. But it works.

[ACL] 12-02-2010 01:11 PM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Quote:
Originally Posted by coolsilver (Post 2005882)
Downloaded the latest from the autobuild site.

Boot animation still very much glitchy as with the build from nate. But it works.
damnit wtf.. i need to check to see what i have different.. my animation is smooth as a baby's ass ..

tiger2wander 12-02-2010 02:34 PM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Yep, I get very smooth boot animation with that 3d driver using HARET method :headbang:

But I was can not boot NAND version because of boot loop, after 2 line of "Waiting for SDCard" printed out by init script my phone was reboot and then keep loop until I take off the battery :( May I have a problem with my SDCard, I has format it back to FAT32 to able to Flash ROM using SDCard but after that my SDCard can not read/re-format by both Ubuntu and Windows :( but WinMo can, I was use WinMo to format it as FAT32 but still can not access directly from my Laptop using Card Reader but can use as Storage Mode through WinMo, Also I still can Flash new ROM from this card, very strange! I was use some application like: parted, gparted, fdisk... but no luck, can not bring it back. I has this problem a long time ago with this card then I continue use WinMo as middle man to transfer data then someday in the past it can be use back directly with my latop using Card Reader ;-) but dunno what the way it can be fixed!

Any suggestion to get out of rid?
I has brick a SDCard before by this way, now it even can not read from WinMo, corrupted :(

natemcnutty 12-02-2010 04:26 PM
Wirelessly posted (Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/22.387; U; en) Presto/2.5.25 Version/10.54)

Quote:
Originally Posted by [ACL
]Nate: i need some haret help again.

when you have a chance, can you dump the contents of the addresses below with panel on and then off?

0xBA08150C
0xBA081510
0xBA0811D4
I'm off work in an hour. Will get those to you as soon as I can.

natemcnutty 12-02-2010 04:28 PM
Wirelessly posted (Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/22.387; U; en) Presto/2.5.25 Version/10.54)

Quote:
Originally Posted by tiger2wander
Yep, I get very smooth boot animation with that 3d driver using HARET method :headbang:

But I was can not boot NAND version because of boot loop, after 2 line of "Waiting for SDCard" printed out by init script my phone was reboot and then keep loop until I take off the battery :( May I have a problem with my SDCard, I has format it back to FAT32 to able to Flash ROM using SDCard but after that my SDCard can not read/re-format by both Ubuntu and Windows :( but WinMo can, I was use WinMo to format it as FAT32 but still can not access directly from my Laptop using Card Reader but can use as Storage Mode through WinMo, Also I still can Flash new ROM from this card, very strange! I was use some application like: parted, gparted, fdisk... but no luck, can not bring it back. I has this problem a long time ago with this card then I continue use WinMo as middle man to transfer data then someday in the past it can be use back directly with my latop using Card Reader ;-) but dunno what the way it can be fixed!

Any suggestion to get out of rid?
I has brick a SDCard before by this way, now it even can not read from WinMo, corrupted :(
There is a specific SD formatting tool I'd recommend using. Give me a few minutes to get back to my desk and I'll link that tool to use.

Edit: Here is that tool: http://www.sdcard.org/consumers/formatter_3/

coolsilver 12-02-2010 05:07 PM
Not sure... how can I tell the grallock file is being loaded off my /sdcard. Would that be part of the issue?

I updated my rootfs when I switched to this newer nbh and modules.

Sent from my HTC Touch Pro 2 on Android with Tapatalk Pro.

natemcnutty 12-02-2010 05:56 PM
Re: NAND Boot Testing - 11-29: New Framebuffer, gralloc, and libGLES
 
Quote:
Originally Posted by natemcnutty (Post 2006061)
Wirelessly posted (Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/22.387; U; en) Presto/2.5.25 Version/10.54)



I'm off work in an hour. Will get those to you as soon as I can.
I must not be doing this right. Can you confirm I have the right stuff here:

Code:
HaRET(1)# setlcd 4
LcdPower(4) dc=04EA0DA9
ExtEscape==1
HaRET(2)# vdump 0xBA08150C 16
ba08150c | 00000000 00000000 00000000 00000000 | ................
HaRET(3)# vdump 0xBA081510 16
ba081510 | 00000000 00000000 00000000 00000000 | ................
HaRET(4)# vdump 0xBA0811D4 16
ba0811d4 | 3a28f7e4 00200000 00600000 52d00400 | ..(:.. ...`....R
HaRET(5)# setlcd 1
LcdPower(1) dc=03E80EDA
ExtEscape==1
HaRET(6)# vdump 0xBA08150C 16
ba08150c | 00000000 00000000 00000000 00000000 | ................
HaRET(7)# vdump 0xBA081510 16
ba081510 | 00000000 00000000 00000000 00000000 | ................
HaRET(8)# vdump 0xBA0811D4 16
ba0811d4 | 3a28f7ff 00200000 00600000 52d00400 | ..(:.. ...`....R


All times are GMT -4. The time now is 05:54 PM.
Page 53 of 274 « First 3435152 53 545563103153 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0