Micro SD Storage Card

[steps]

That article is puzzling me....I have a 2gb SD CARD that I was using in my 6600 and the article states they stopped at 512MB??? WTF??? Whoever wrote the article needs a technology check.

[dtndvm]

Originally Posted by Brandon_387

I have searched the forums and have not found a suitable concrete answer. The question I would like to pose is Whats is the MAXIMUM size storage card that the Sprint Mogul/PPC6800 will support. I am looking to install a 4GB but would prefer to install a 6GB.
Thanks in Advance

I got a 6GB SanDisk card 2 weeks ago. Mogul would not recognize it's full capicity out of the box. Played around with it quite a bit but could only get it to recognize 1.7GB. Upgraded the ROM and tried installing SDHC cab but still no luck. Then found luv2chill's updated drivers in the upgrades forum. Installed the SDHC.777 cab and Mogul saw full card with no trouble. Filled the card with data and no read/write problems so far. Hope this helps!

[{SBR}_LEGION]

I have the mogul and also have a 4 gig card and when I pull up my memory it says it has the memory its supposed 2 for a 4 gig but I can't get the sprint music store 2 run on my phone but I don't necessarily need 2 run music store but I have to have music on my phone so if u have any sugeestions on another way 2 get music on my phone please tell me.

[bakntyme]

Originally Posted by {SBR}_LEGION

I have the mogul and also have a 4 gig card and when I pull up my memory it says it has the memory its supposed 2 for a 4 gig but I can't get the sprint music store 2 run on my phone but I don't necessarily need 2 run music store but I have to have music on my phone so if u have any sugeestions on another way 2 get music on my phone please tell me.

Quickly...take your Mogul back and exchange it under warranty for one that has working punctuation and shift keys. And by the way, it takes the same number of key strokes to type "to" as it does to type "2".

[andrewz76]

Originally Posted by dtndvm

I got a 6GB SanDisk card 2 weeks ago. Mogul would not recognize it's full capicity out of the box. Played around with it quite a bit but could only get it to recognize 1.7GB. Upgraded the ROM and tried installing SDHC cab but still no luck. Then found luv2chill's updated drivers in the upgrades forum. Installed the SDHC.777 cab and Mogul saw full card with no trouble. Filled the card with data and no read/write problems so far. Hope this helps!

dtndvm,

Is the SDHC .777 cab the "drivers" from luv2chill that you are referring to, or are there seperate drivers in addition to the sdhc.777 cab that I need to install to get my mogul to read the 6gb micro sdhc card from sandisk?

Thanks,
andrewz76

[webcrush]

Originally Posted by dtndvm

I got a 6GB SanDisk card 2 weeks ago. Mogul would not recognize it's full capicity out of the box. Played around with it quite a bit but could only get it to recognize 1.7GB. Upgraded the ROM and tried installing SDHC cab but still no luck. Then found luv2chill's updated drivers in the upgrades forum. Installed the SDHC.777 cab and Mogul saw full card with no trouble. Filled the card with data and no read/write problems so far. Hope this helps!

dtndvm--forgive my confusion, but you state you saw a unit running WM5 that could see the full 6gb card?

What OS are you running now? It sounded like you upgraded to WM6.

I'm having the same issue you experienced with my device only seeing the first 1.7GB. The SDHC.777 cab didn't work for me though (couldn't read any SD card with those dll's), but it may be due to me still running WM5.

I'm hoping someone can figure out this issue I'm having.

[jtrag]

Originally Posted by bakntyme

Quickly...take your Mogul back and exchange it under warranty for one that has working punctuation and shift keys. And by the way, it takes the same number of key strokes to type "to" as it does to type "2".

How do you know he typed that with his phone?

[dtndvm]

Originally Posted by webcrush

dtndvm--forgive my confusion, but you state you saw a unit running WM5 that could see the full 6gb card?

What OS are you running now? It sounded like you upgraded to WM6.

I'm having the same issue you experienced with my device only seeing the first 1.7GB. The SDHC.777 cab didn't work for me though (couldn't read any SD card with those dll's), but it may be due to me still running WM5.

I'm hoping someone can figure out this issue I'm having.

When I was first trying to get my 6GB card to work on my Mogul, I stopped into an Alltel store. They had a PPC6800 running WM5 on display. I popped my card in and it worked great on the stock WM5 Alltel ROM. The sales rep had a PPC6800 in his pocket that he had upgraded to WM6 (unsure which ROM). He put the 6GB card into his device and it worked great too. He had never even seen a 6GB card so I know he hadn't added any files to support the larger cards. Conclusion is that the Alltel ROM's support SDHC cards with no tweaks whether running WM5 or WM6.

Got my Mogul to work with my 6GB card by installing the SDHC777 cab originally posted by Luv2chill. My Mogul has always been running WM6. When I upgraded to the newest ROM, my card was recognized and works with the stock ROM (no SDHC777 needed). Interesting, the dll's that the SDHC777 cab installs are not found in windows in the new ROM?

You might want to try the SDHC cab if you don't want to install the latest ROM. Before I found the SDHC777 cab, I tried the SDHC cab and had no luck. My Mogul only saw the 1.7GB yours is seeing. Both cabs contain the same files, but they are different versions.

Good Luck

[webcrush]

Originally Posted by dtndvm

You might want to try the SDHC cab if you don't want to install the latest ROM. Before I found the SDHC777 cab, I tried the SDHC cab and had no luck. My Mogul only saw the 1.7GB yours is seeing. Both cabs contain the same files, but they are different versions.

Good Luck

Thx.

I'm a bit of a bastard right now. My device is actually a 1st generation Motorola Q running WM5 and there is not ROM upgrades to WM6.

I used the first SDHC cab to allow SDHC cards to work, which let me use a Class 4 SDHC 4gb card.

As I said, the SDHC.777 dll's disable my SD slot. It looks like the dll's are just newer. If you saw a WM5 device able to read the full 6gb, then I think there may be some missing files or reg entries that may be needed.

I'm hoping someone can help me find the missing link.

[jasplay]

nice good job