tweak to make TF3D more fluid

[abovelegit]

originally found on thetouchblog.com, link of the day for august 22. download advanced config tool from http://www.touchxperience.com/ then, change the following settings under Performance in the Tool App to get the Touch Flo to fly.

• File system cache to 8mb
• System filter cache to 131072

i dont take credit for this, nor do i have a diamond, yet, so if you do this reply back with your experience.

EDIT: just follow the steps at www.thetouchblog.com it has instructions for the .NET upgrade needed.

[xenoetry]

nice if true...certainly sounds good

[abovelegit]

Originally Posted by xenoetry

nice if true...certainly sounds good

its true, if you go to thetouchblog.com and watch his opera review he states it in the beggining, hes a reliable blogger.

[Juicy47]

Originally Posted by abovelegit

originally found on thetouchblog.com, link of the day for august 22. download advanced config tool from http://www.touchxperience.com/ then, change the following settings under Performance in the Tool App to get the Touch Flo to fly.

• File system cache to 8mb
• System filter cache to 131072

i dont take credit for this, nor do i have a diamond, yet, so if you do this reply back with your experience.

FYI, CDMA Diamonds are not shipping with the newer version of .NET (3.5), and this must be installed prior to loading the config app: http://www.microsoft.com/downloads/d...9-0041345B3385

For reference, CDMA Diamond defaults are:

• File system cache - auto (default)
• System filter cache - disabled

My findings are that the recommended settings actually make TF3D SLOWER on my device.

[abovelegit]

yeah so get the .NET firmware before you install