View Single Post
  #2 (permalink)  
Old 08-03-2008, 05:03 PM
GaMedic's Avatar
GaMedic
Ditch Doctor
Offline
Threadstarter
Location: Georgia, USA
 
Join Date: Oct 2007
Posts: 1,172
Reputation: 3637
GaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIPGaMedic is still contributing even after becoming a VIP
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: Step by Step tutorial for unlocking your device and cooking your own ROM!!!

I will now outline the steps you can use to unlock your phone.

This unlocks the phone so that you can put a different Radio (GPS enabled) and a different ROM on it. You can use Olipro 2.40 or nuespl 2.47 to unlock your Titan device.
To run Olipro 2.40 you need to plug the USB to your PC and PPC and run the file from your desktop. The phone screen will change to a rainbow colored screen (bootloader mode) and should read TITA100 MFG, SPL-2.40. Olipro, CPLD-9. Once you have done that you will be ready to install a GPS enabled Radio. The important thing is to be careful which Olipro spl you run. DO NOT USE THE OLIPRO 1.20
spl. The 1.20 and 2.40 are posted in the same thread and many people have chosen the wrong one inadvertently. (By the way the links are directly to the file you should need. This is the link to the thread in case you need direction from there.)
Your other unlock option is nueSPL 2.47 (Thread link). The nice thing about nuespl 2.47 is that it can be ran using an SD card. The SD method instructions are fairly simple. You download the nuespl 2.47 to your PC. Take an SD card, must be 2gb or less in size, and place it in a card reader. On your PC navigate to the card reader through My Computer. Right click on the drive containing the card reader and select Format from the menu. Select fat32 as the format setting. Once the card is formatted you take the 2.47 spl you downloaded and place it on the card. It cannot be inside a folder it must be on the root of the storage card. Right click on the file and select rename. Rename the file to TITAIMG.nbh. Once the file is renamed place the SD card into the device and put the phone into bootloader mode (Power, camera, reset all pressed at the same time for about 2 seconds) and follow the prompts on the screen to update the spl. After the screen says updated or update complete, press the reset button. While the phone is resetting place the phone back in bootloader mode.

Edit : This information was sent to me by another user, so I am adding it to the Tutorial.
When you unRAR nueSPL, you don't actually rename it and place it in the root. You run the exe from within the device and it automatically checks to make sure all the other requirements are in place, then creates the TITAIMG.nbh file for you in the right location and walks you through putting the phone into the bootloader.


If you get stuck in the bootloader screen at any time (when you reset it goes to bootloader screen and will not boot to splash screen) just go to this post and run the exit-bl. in that thread.

Legend: Topics, Threads at ppcgeeks, Files you can download, Screeshots, Links to web sites, Important information, FTP folder, Edits.


__________________
Step by Step tutorial for unlocking your device and cooking your own ROM!!!

Feel free to if choose to do so.
My ROM for Verizon, Sprint, Alltel, US Cellular and Cricket 20931 Base!!

The THANKS button is over there------------------------------------------------>

Last edited by GaMedic; 08-04-2008 at 07:33 PM.
Reply With Quote
This post has been thanked 63 times.