[wraith79]

Ok, here's what I did!

1. Make sure you have everything you need! In my case, two wires, 3.5mm audio cable and 2.5mm simple video cable, the adapter from a Diamond and of course my phone! (Pic 1)

2. Take the Diamond adapter crack it open and cut the BLUE wire. As seen in picture 2! Then put it all back together, because the hard part is over! Tape it up so it doesn't fall apart, leaving the 2.5mm jack accessible!

3. Take your 2.5mm video jack (Pic 3) plug it in to the Diamond adapter

4. Take your 3.5mm audio jack (Pic 4) and plug it in to the phone.

5. Now take the adapter and plug it into the USB port on the bottom of the phone!

6. Find a TV with all the corresponding RCA connections, plug it in and away you go! Oh and a little side note, the phone charger still works through the adapter! Sp, you can watch and charge at the same time!