LOW LEVEL Radio version info gathering thread (mtty needed)

[Daved]

Originally Posted by puff

funny the device name is samsung_k9k2g08

if you cant get bootloader mode (power + cam + reset) and you just get black screen no matter what...
then it could be stuck in download mode, if so... hope you got insurance.

Originally Posted by vilord

Why did you type task 2a? Did someone somewhere tell you to do that?
I'm thinking you came to this thread because its the only one with MTTY stuff on this level...
Samsung phones (last I checked) don't have a bootloader, so if you get a bad flash (or format the flash like you did here) you are bricked and need to send it back.

If you don't have insurance or warranty, good luck...

I'm pretty sure samsung_k9k2g08 is the name of the NAND flash memory used in the Vogue, other HTC pocketpcs and other phones in general, it doesn't mean he has a Samsung phone.

[vilord]

Did you ever get your phone to work again??

Originally Posted by hykq

task 32
Level = 0
Cmd>task 2a
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=160, total block of CE=1888
ERASE block 479 FAIL !!!
ERASE block 481 FAIL !!!
ERASE block 605 FAIL !!!
ERASE block 607 FAIL !!!
ERASE block 609 FAIL !!!
Write 0xFF start page=0x2800, total page=0x1D800
SPL version and MFG TAG are same, skip it.
restore SPL OK
restore MISC configuratoin OK
Format ALL end
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 6 (0x6) is reversed block
BLOCK 479 (0x1DF) is bad block
BLOCK 481 (0x1E1) is bad block
BLOCK 605 (0x25D) is bad block
BLOCK 607 (0x25F) is bad block
BLOCK 609 (0x261) is bad block
OS NOT FOUND !!!

Cmd>task 32
Level = 0
Cmd>info 2
HTCS00000000jR*TCE
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 6 (0x6) is reversed block
BLOCK 479 (0x1DF) is bad block
BLOCK 481 (0x1E1) is bad block
BLOCK 605 (0x25D) is bad block
BLOCK 607 (0x25F) is bad block
BLOCK 609 (0x261) is bad block
OS NOT FOUND !!!

Cmd>task 8


After usb plug, the computer show "USB unknown divice", Vid0000&Pid0000&5&36........

It is sleep forever now. PLZ give me an advice.

[herdrich31]

ACS (Alaska Communication Systems)

Not really sure what i did but im now stuck at the boot loader screen.

Cmd>info 2
HTCSUTSI_001ʼ8,HTCE


Cmd>info 7

HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: Vogue, Bootloader Version : 0.36.0000
Built at: Sep 11 2007 17:15:51
Copyright (c) 1998-2006 High Tech Computer Corporation

CPU ID=0x4107B364
Main Board ID=0x0, CPLD ID=0x3

Cmd>rtask a
Command error !!!

Then i just continue to get command error after that. Thank you for your time.

[pdadev]

Originally Posted by hykq

task 32
Level = 0
Cmd>task 2a
Format ALL start
backup SPL OK
backup MISC configuration OK
SPL start start block=160, total block of CE=1888
ERASE block 479 FAIL !!!
ERASE block 481 FAIL !!!
ERASE block 605 FAIL !!!
ERASE block 607 FAIL !!!
ERASE block 609 FAIL !!!
Write 0xFF start page=0x2800, total page=0x1D800
SPL version and MFG TAG are same, skip it.
restore SPL OK
restore MISC configuratoin OK
Format ALL end
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 6 (0x6) is reversed block
BLOCK 479 (0x1DF) is bad block
BLOCK 481 (0x1E1) is bad block
BLOCK 605 (0x25D) is bad block
BLOCK 607 (0x25F) is bad block
BLOCK 609 (0x261) is bad block
OS NOT FOUND !!!

Cmd>task 32
Level = 0
Cmd>info 2
HTCS00000000jR*TCE
Cmd>info 8
--- 2K bytes sector version ---
DEVICE NAME=samsung_k9k2g08
DEVICE ID=0xAA
DEVICE MAKER ID=0xEC
PAGE SIZE=0x800
TOTAL PAGE SIZE=0x840
BLOCK COUNT=0x800
BLOCK PAGE=0x40
Checking block information
BLOCK 6 (0x6) is reversed block
BLOCK 479 (0x1DF) is bad block
BLOCK 481 (0x1E1) is bad block
BLOCK 605 (0x25D) is bad block
BLOCK 607 (0x25F) is bad block
BLOCK 609 (0x261) is bad block
OS NOT FOUND !!!

Cmd>task 8


After usb plug, the computer show "USB unknown divice", Vid0000&Pid0000&5&36........

It is sleep forever now. PLZ give me an advice.

bad block? its sound a hardware issue, i've got one bad block on titan, and have to replace NAND Flash