MightyRom w/ issues

[probuild521]

so im running the newest mightyrom with everything closed it is at 80%. all i have in the remove program portion of settings are:

skyfire
google maps
MightyMike and LiRico 6.5 Mighty Rom 2(is that the rom itself?)
nuelight3(flash light app)

anyideas? also the slider commonly will freeze and the only way to fix it is a batt pull.

[supdawg]

Did you run a clear storage after you installed mighty rom? If not, please do so and see if your issue still exists.

[probuild521]

Originally Posted by supdawg

Did you run a clear storage after you installed mighty rom? If not, please do so and see if your issue still exists.

could you explain how this is done?

[LilRico]

That's seems to be very high... Something doesn't sound right.... The MightyMike and LiRico 6.5 Mighty Rom 2 is just themes that install when the customizations run. I would recommend you hard resetting by going to Start>settings>system>Clear Storage. I haven't seen the memory that high, so there's something else going on there. Back up your data, hard re-set and start over.

[Asphyx]

Don't bother with clear storage it will not solve your problem...

your problem is due to the fact you did not lower the pagepool before flashing to account for the reduced ram in the Verizon TP...

You need to reflash your rom...but before you do run the pagepool changer, point it to the rom, select then change the pagepool to 8 or 12 (I suggest 8 on a loaded rom, 12 for a clean bare bones)

You should wind up in the 60-70% of ram usage range. You will still run out of ram on occassion especially if your the type that like to do a hostile takeover of AT&T via your phone...

But look for a program called CleanRam and use it when you see yourself getting into the 80's on ram usage.
Do a level 3 clean and your good to go!

Rico He has a VZW TP with the gimped ram...he didn't adjust the pagepool accordingly!

[supdawg]

Originally Posted by probuild521

could you explain how this is done?

Go to start menu - > Settings - > System -> Clear Storage

[LilRico]

Originally Posted by Asphyx

Don't bother with clear storage it will not solve your problem...

your problem is due to the fact you did not lower the pagepool before flashing to account for the reduced ram in the Verizon TP...

You need to reflash your rom...but before you do run the pagepool changer, point it to the rom, select then change the pagepool to 8 or 12 (I suggest 8 on a loaded rom, 12 for a clean bare bones)

You should wind up in the 60-70% of ram usage range. You will still run out of ram on occassion especially if your the type that like to do a hostile takeover of AT&T via your phone...

But look for a program called CleanRam and use it when you see yourself getting into the 80's on ram usage.
Do a level 3 clean and your good to go!

Rico He has a VZW TP with the gimped ram...he didn't adjust the pagepool accordingly!

I should have looked!!!! That makes all the sense in the world... Thanks for clearing that up.

[probuild521]

Originally Posted by Asphyx

Don't bother with clear storage it will not solve your problem...

your problem is due to the fact you did not lower the pagepool before flashing to account for the reduced ram in the Verizon TP...

You need to reflash your rom...but before you do run the pagepool changer, point it to the rom, select then change the pagepool to 8 or 12 (I suggest 8 on a loaded rom, 12 for a clean bare bones)

You should wind up in the 60-70% of ram usage range. You will still run out of ram on occassion especially if your the type that like to do a hostile takeover of AT&T via your phone...

But look for a program called CleanRam and use it when you see yourself getting into the 80's on ram usage.
Do a level 3 clean and your good to go!

Rico He has a VZW TP with the gimped ram...he didn't adjust the pagepool accordingly!

where is the pagepool changer?

[Asphyx]

Mike usually releases it with the rom...look in the RUU folder or whatever name folder the rom is in.