PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro (http://forum.ppcgeeks.com/forumdisplay.php?f=63)
-   -   I don't think its bricked, but what do I do? (http://forum.ppcgeeks.com/showthread.php?t=75967)

coondogg97 07-23-2009 06:40 PM

I don't think its bricked, but what do I do?
 
Alright, I am admittedly a total n00b. I flashed my Verizon HTC Touch Pro twice and I never had a problem. Well I just went to flash the newest Verizon OEM ROM firmware 1.08(RUU_Raphael_C_VZW_WWE_1.08.605.4_RS_615021_VZ W_1.03.09V_2.01_58002_Ship.exe) so I could start playing with the Visual Voicemail option. I went through the steps and the bootloader came up on the device and the gray screen came up to press the power button to start the process. I hit the power button, the phone rebooted and came to the same screen. I tried a few times, but the phone keeps going to that same screen with the option of flashing or canceling. So now im stuck in an endless loop. Although I am able to get to a bootloader screen that reads "Upgrade ROM code error Please try again) and then the word Serial appears at the bottom. But even if I try to reflash on this screen I get the same connection error on my PC. I am using XP Pro if that matters.

I have tried a hard reset and reflashing, but I get a connection error. I also tried flashing from the SD card but nothing seems to be working (I think I did it correctly, but I can be wrong). Anyone have any clue what I can do to get around this?


Thanks in advance!

EDIT: Sorry, I just realized this is the completely wrong forum.

DomSim 07-23-2009 06:54 PM

Re: I don't think its bricked, but what do I do?
 
connect your phone to your pc and enter bootloader, you should see "usb" at the bottom, no flash from your pc using the .exe

coondogg97 07-23-2009 07:06 PM

Re: I don't think its bricked, but what do I do?
 
Quote:

Originally Posted by DomSim (Post 1055880)
connect your phone to your pc and enter bootloader, you should see "usb" at the bottom, no flash from your pc using the .exe

Wow, thanks for such a fast response. As soon as I reset the phone to go into bootloader mode the first screen that comes up is the option to either press the power button to start the update or press the action button to cancel. If I hit the action button the bootloader comes up Security Unlocked and has the Upgrade ROM code error but it does not say USB under it. I try to run the executable file and get an an error 260 connection on my PC.

silentjoker 07-23-2009 07:12 PM

Re: I don't think its bricked, but what do I do?
 
can u get into bootloader multi color screen?

DomSim 07-23-2009 07:16 PM

Re: I don't think its bricked, but what do I do?
 
k take your sd card out and format it to fat32
install winrar if you dont already have it
right click on the .exe and select extract.
rename RUU_signed.nbh to RAPHIMG.nbh
copy RAPHIMG.nbh to the root of your storage card
insert sd card back into phone and then reset back into the bootloader
should load the rom and allow you to hit the power button to update.
if not, you may have a problem with the memory card or your hardspl

coondogg97 07-23-2009 07:18 PM

Re: I don't think its bricked, but what do I do?
 
Quote:

Originally Posted by silentjoker (Post 1055916)
can u get into bootloader multi color screen?

Yes, thats where I am getting the Upgrade ROM code error. Please try again.

I did the reset into bootloader mode with the device plugged into the computer and didn't have anything in the white section of the bootloader (it didnt say serial or USB). Then I reset the device without it being attached and Serial appears in that white section. Could it be something with my USB drivers? I was able to activesync it initially.

DomSim 07-23-2009 07:21 PM

Re: I don't think its bricked, but what do I do?
 
if you have not had your phone in bootloader while hooked up to your pc before it may take it a few minutes to show "usb" at the bottom as it needs to install the drivers first.

coondogg97 07-23-2009 07:46 PM

Re: I don't think its bricked, but what do I do?
 
Quote:

Originally Posted by DomSim (Post 1055938)
if you have not had your phone in bootloader while hooked up to your pc before it may take it a few minutes to show "usb" at the bottom as it needs to install the drivers first.

The device was sitting plugged in while I wrote that last post and USB never come up. I am running the flash from the memory card per your instructions and so far it seems like it is updating. I will keep you posted.

Thanks!

coondogg97 07-23-2009 07:58 PM

Re: I don't think its bricked, but what do I do?
 
Alright the phone is re-imaged and booting. It is "prepairing your device for first use". I think I am in the clear!

Thanks again for the help guys!

I <3 DomSim

studentjunk 07-23-2009 08:10 PM

Re: I don't think its bricked, but what do I do?
 
I am not completely shure what's going on, but it sounds like the phone flashed halfway to me.

I would remove the sdcard and go into bootloader mode and then try flashing that way. You should also probably take the battery out and put it back in. Not sure if it would help (the battery thing), but it won't hurt, and it solves some phone problems at time.

never mind. i see you posted while I was pontificating.


All times are GMT -4. The time now is 06:14 AM.

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0