Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
I'm having an issue where Sashimi is only working on initial install. after, it tells me to use a mortscript version between 4.1.1.7 and 4.2. the rom I've got using 4.3b5 (what comes standard on it.) does anybody have a work around? So far this has been one of the most useful threads I've read on customization :)
thanks! -Mac |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
http://forum.ppcgeeks.com/showthread...=75214&page=11 |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
I'll report back if I find a fix... |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
where did you get the Icon set as i must "BITE" |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Email signature Reg location
Hey Murducky, this thread is all that. Thanks for the colab of Reg back up files. Can someone please provide me the Reg. location to backup my Email Signature? Thanks in advance!!!
|
Re: Email signature Reg location
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
I wait eagerly. -Mac |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
Go figure... :scratch: Just give'er a try and see if it launches for you... Make sure you launch from the shortcut in your start menu just in case... Fingers crossed!!! :headbang: |
Re: User Customization Backup for Touch Pro using sashimi
Has anyone ever been able to auto config or skip the calibration? My TP screen is dead and I can't get past that point. My mobiler doesn't help either, figure the gurus here may know something to get around it.
|
Re: User Customization Backup for Touch Pro using sashimi
Total Commander configuration:
HKCU\Software\Ghisler |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
Arcsoft MMS Settings backup reg key \HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1 export to Storage Card\SASHIMI\Auto\REG |
Re: User Customization Backup for Touch Pro using sashimi
Just got around to setting this all up...thank you for the guide. About to hard reset...
....wish me luck. :) EDIT: Took fifteen minutes from flash to finish...awesome. ...and I think I can control the order that my cabs are installed by changing the name of the files...seems like they install in alpha order. Really dig this program, can't believe I took so long to set it up. |
Re: User Customization Backup for Touch Pro using sashimi
So I finally decided to try some of this today.. just been using an auto install app to load my .cabs and doing the customization later. I don't do a whole lot to my phone so it hasn't been too bad.
I finally got tired of setting up my slingbox and wanted to automate the install process using some of the tools here. The first thing I wanted was a good registry editor and I knew there was one out there that allowed you to navigate the phones registry on your pc. Looking at the XDA UC thread I found CeRegEditor which I must say is great!http://ceregeditor.mdsoft.pl/ This program will make .cabs of your registry tweaks and makes finding changes to your registry easy.... all done on the pc while synced. I am still learning but I have managed to get my slingbox 100% configured using either sashimi or the .cabs made by ceregeditor. Thanks for all the tips here I am also figuring out some of the other customizations as well. Sashimi seems to install everything so I guess I will stick with it for awhile and see how it goes. |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Some more registry keys....
SKTools5 Registration: HKEY_CURRENT_USER\Software\sk\tools "startup"=dword:nnnnnnnn [your your registration code here] SKTracker Registration: HKEY_CURRENT_USER\Software\sk\tracker "info" key Settings (rules): HKEY_CURRENT_USER\Software\sk\tracker "rules" key Spb News 2.0 Registration: HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A} "ADODB"="your registration code here" Settings: HKEY_CURRENT_USER\Software\Spb Software House\Spb News Spb Insight (version prior to Spb News 2.0) Registration: HKEY_CLASSES_ROOT\CLSID\{0A2D78B4-60D1-459D-AB3F-4D871E313E4A} "ADODB"="your registration code here" Spb Wallet 2.0 Registration: HKEY_CLASSES_ROOT\CLSID\{A79D1B0D-2F6A-4E7E-AF94-5EEBC8BFD684} "2_SIPFlag2"="your registration code here" Spb Mobile Shell 3 Registration: HKEY_CLASSES_ROOT\CLSID\{B8D93F90-8931-43BB-AA6D-0F0AE84A6200} "SIPFlag2"="your registration code here" SprintDB Pro 4.0 Registration: HKEY_CURRENT_USER\Software\Kaione\SprintDB Pro\Config "RegistrationCode40"="your registration code here" Hearts (sorry, still one of my favourite 'old' card games) Settings, including player name: HKEY_CURRENT_USER\\Software\Microsoft\Hearts |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: Email signature Reg location
Quote:
http://www.ppcgeeks.com/forums/showthread.php?t=73147 But it comes with some cons i.e. only works for your Outlook E-mail (Exchange) sig, and will continue to keep what you've added in the provisioning file even if you try and change it through Tools | Options | Signatures later on. |
Re: User Customization Backup for Touch Pro using sashimi
Last two Energy builds my contacts wont back up. I've got pim.vol in the Auto>Root folder, any ideas?
|
Re: User Customization Backup for Touch Pro using sashimi
Set Titanium as Default | TouchFlow as Disabled
this key is wrong... should be \HKLM\Software\Microsoft\Today\... |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
any attempt to replace pim.vol manually has not worked for me but I am still new to this. |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
I just read that if you disable tf3d you can replace the file... not sure if that helps or not. I have been searching for a way to backup my windows live ID and password so the fields are already set when I log in for the first time. Seems like nobody has found this yet. anyone know? |
Re: User Customization Backup for Touch Pro using sashimi
so ive been playing around for a few days on and off.. and for the most part i have it all down... everything installs fine-still have to run a script for titaniumweather to show my icons, but all the info loads in fine(i think its just because it needs to run once though)... pim backup/restore was a simple setup...
im not sure why everyone goes through and backups reg entry by reg entry.. i just did the full backup, and put it in the auto\reg folder and that did everything... all my titanium, including weather, ringers, alerts, power settings, everything really... was way faster... just need to write the .ini now so everything goes where i want it so i have a nice clean start menu.. only thing i couldnt figure out was titanium has the default "my favs" which is PIE favorites, i cant get that to load in at all.... is it because i havent synced, so the favorites arent in the device yet? or am i just missing something simple?? thanks for all the great info and write up... made it easy when or if i did have questions... the 4 youtube videos r tremendous everyone, if your stuck watch those... i watched the first 2 once, and had everything, including makisu down after that.. came here, found the post on linking to folders and that was the final piece i needed to have to do nothing but a cpl "ok's" after a flash... looks like goodbye activesync here real soon |
Re: User Customization Backup for Touch Pro using sashimi
well the main reason is that each new build that comes out will have different registry changes. i would hate to overwrite them with bad data...
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
You could always do the reg-by-reg and then compile them into one single registry file to place in the auto/reg. However, by keeping them separate you can pick and choose which to keep and which to discard in the future as you stop using certain apps. The complete backup/restore is of course by far the easiest to create though :mrgreen: However, with something like SKTracker you can fairly easily compare before and after registry snapshots and then save the differences to a new registry file. |
Re: User Customization Backup for Touch Pro using sashimi
In post #1, Murducky says copy all cab files to "Storage Card\SASHIMI\Auto\Cabs\", but by default, SASHIMI creates "Storage Card\SASHIMI\Auto\Cab\" which is described in SASHIMI's documentation as the "Default directory for CAB and tandem/bundled files for auto install."
What is the correct subdirectory name? "Cabs" or "Cab"? Or does it make a difference? |
Re: User Customization Backup for Touch Pro using sashimi
yeah, just use the one sashimi created.
|
Re: User Customization Backup for Touch Pro using sashimi
having some issues with install on my TP2... tried to start a thread in TP2, but no luck.. i dont wanna repost so check it out http://forum.ppcgeeks.com/showthread.php?t=84262 maybe someone has an idea...
in short, the auto\cab\SC is not automating itself and hanging... few other issues but all involving the SC portion in there as well... EVERYTHING else will run to completion if i remove everything from the SC folder... appreciate it if some peeps would take a look.. thanks |
Re: User Customization Backup for Touch Pro using sashimi
After updating to MightyROM 6.5 I can no longer run Sashimi. I'm greeted by the below picture. I'm sure I have some version of Mortscript since I have successfully used CHome Editor.
Can someone advise me on how to remedy this problem? Thank you. Skid http://i27.tinypic.com/24pw1o6.jpg |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
Hey Skid, Sashimi uses a later version of Mortscript so obviously you used CHome before Sashimi, which means that Mortscript is still running. Simply drill into the Sashimi program folder and click that Mortscript. Keep in mind, when you want to use CHome, you have to drill into it's program folder and choose that Mortscript, or you'll get the same error only in reverse!!! Hope this helps!!! |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
One other question. Is there a way to get rid of the dialog box I get after a soft reset? it's another Mortscript-related thing. Something like Mortscript is registered, run a script or read the manual. I get this dialog box after every soft reset. Thanks much! Skid |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
Thanks again, Skid |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
Re: User Customization Backup for Touch Pro using sashimi
Quote:
Thanks for your help. Skid |
Re: User Customization Backup for Touch Pro using sashimi
Quote:
|
All times are GMT -4. The time now is 01:41 PM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com