how many mA does your TP use
 

I feel like the TP uses to much power on idle. maybe its just the 3d chip working all the time compared to XDAs that dont have a 3d chip but even with the backlight down and no data session enabled i still get about somewhere between 160 to 240 mA on discharge. I remember my touch only had 150 mA if the data was on and 300+ mA if gps was on... so what gives why is this phone less efficient

edit: Checking with nuePowerCPL

edit2: Conflippers rom, telus radio, stock battery, Slot Cycle Index: 2

Re: how many mA does your TP use
 

How are you monitoring this?

Is the poll question "How much current does your phone draw in standby"

Re: how many mA does your TP use
 

nuePowerCPL

Re: how many mA does your TP use
 

Is the version for the Diamond the same for the TP?

Re: how many mA does your TP use
 

the 1% dll works on both the diamond and tp but the cpl should work on any htc device

Re: how many mA does your TP use
 

Can you please post a cab for nuePowerCPL? And i'm sure its important that people state what rom is being used.

Re: how many mA does your TP use
 

It should be under 50. If it's over 50, then the CPU isn't in low power mode, or some radio is powered up.

I believe standby should be in the 20s, based on the expected standby time (doing nothing at all, never powered on) of ~ 2 days.

Edit: I'm on the stock sprint rom, radio 1.11

Re: how many mA does your TP use
 

Downloads at
http://www.nuerom.com/BlogEngine/page/nuePower.aspx

Re: how many mA does your TP use
 

Wow....this is what mine is registering.....any thoughts whats causing it to discharge like that? im using stock sprint rom

TK

Re: how many mA does your TP use
 

mine is -157 but my phone lasts at least 12 hours. i believe you have to take some off if your screen is on.