CANT FIND MY PROs ESN

[jhgas]

Originally Posted by Baffles

I just wrote an app to get your MSL/SPC automatically and instantly. Should work on most every CDMA HTC device out there. Click the link in my sig.

Hi Baffles, just tried it out on a diamond, and it just gave me a message saying I needed a newer version of .net, I´m in a rush so I´ll try it again tomorrow after putting a custom ROM or updating .net

Do you have to install newer .net on the PRO as well? Bcs this program sounds like heaven hehe.

Thanks a lot.

[jhgas]

Originally Posted by jhgas

Hi Baffles, just tried it out on a diamond, and it just gave me a message saying I needed a newer version of .net, I´m in a rush so I´ll try it again tomorrow after putting a custom ROM or updating .net

Do you have to install newer .net on the PRO as well? Bcs this program sounds like heaven hehe.

Thanks a lot.

It has been decided, and you Baffles are my new freaking ppc idol hehe.

Flashed a new ROM on my diamond, tried again, and it worked like a charm. Now I can´t wait for my PRO to get here.

Thanks a lot.

[esqueue]

Originally Posted by Baffles

I just wrote an app to get your MSL/SPC automatically and instantly. Should work on most every CDMA HTC device out there. Click the link in my sig.

sick. thanks =D>

[stevedog1]

Originally Posted by Baffles

I just wrote an app to get your MSL/SPC automatically and instantly. Should work on most every CDMA HTC device out there. Click the link in my sig.

I cannot believe how simple and extremely easy your program was able to get my MSL. You are the best. Thank you very much!

[maximus_pr]

Originally Posted by Baffles

I just wrote an app to get your MSL/SPC automatically and instantly. Should work on most every CDMA HTC device out there. Click the link in my sig.

not working for me says i need framework .net update

[RonDutt]

You need to download hte .NET Compact Framework 3.5 for it to work. See microsoft.com

[toddnaz]

Originally Posted by Krayziepop

Just an FYI, but the GetSPC program doesn't work on the Diamond/Pro. You will need a registry editor like PHM Regedit, then follow these instructions. Good luck

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

Excellent post, thank you. I used GetSPC on my Titan with no problem but couldn't figure out how to do it on my TPro. First thing is when I try to open up ATDbg0.txt it errors out and says sharing violation or something. So all I did was make a copy and pasted in the same directory and opened that up. Then you got to look thru all of the command lines until you find the one above with your phone's MSL#. Another thing I noticed that happens when you try to edit is that if you turn off the radio beforehand it won't let you go into EPST mode. So go into EPST (##778#) then turn off the radio then go into edit. They just make it a little more difficult but you can get in there.

[blackbolo]

Originally Posted by Krayziepop

Just an FYI, but the GetSPC program doesn't work on the Diamond/Pro. You will need a registry editor like PHM Regedit, then follow these instructions. Good luck

Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1

* Wait a about 10 minutes (more time will not hurt), and soft-reset.

* Check to see that the file \Atlog\ATDbg0.txt has been created.

* Return the values back to what they were (most likely 0) waiting the same amount of time as above.

* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~


The numbers next to the Rx: +HTC_RMSL line should be your MSL

Thanks for the help.But I did not see any command in the ADTblog.text after the soft reset My phone :HTC Touch Pro unlocked to boost
Rom:silence Rom 6.5
RaPL.307
my problem is getting the unlock code to change my web settings as I can not access the web.thanks for your help in advance for whatever you can help with

[blackbolo]

actually I found the code by going back over your steps My apologies for re writing you again thanks again