Sprint Touch Pro2 Does not boot up
 

I had the Might ROM installed on my Sprint Touch Pro2 and then I tried installing this ROm http://forum.xda-developers.com/showthread.php?t=572938

The phone does not boot up at all after installation.

Is it Bricked?

I tried pressing the volume down button and End Key still nothing.

Re: Sprint Touch Pro2 Does not boot up
 

you might have picked up a GSM ROM...it won't work on your CDMA device...stick with ROM's out of here...XDA is majority GSM.

ok...just reading your post again....try this for bootloader...

reset button (in the batt case), volume down and end key while you power up the device from off. You should get bootloader from this.

also, did you flash a radio too? and you're trying to get a Sprint TP2 onto AT&T's network??

Put your phone in bootloader mode...and flash from there...I suggest flash stock first...then ROM of choice.

Re: Sprint Touch Pro2 Does not boot up
 

well from reading that looks like it contains a radio as well.looks like a gsm also.so you may need to flash stock. so i would assume you need to of had the sim unlocked as well. being sim needs to be unlocked for radio flashing. you should try asking their in the creators thread...

Re: Sprint Touch Pro2 Does not boot up
 

I had the phone unlocked with security and CID as well before flashing to MightyROM for GSM.

Then I tried to flash to this new one and it won't even start.

Any help how Can i get it to atleast the bootloader.

What are my options.

This was a new in box phone from 2 days back and not yet registered.

Re: Sprint Touch Pro2 Does not boot up
 

the problem is that you flashed a GSM rom onto a CDMA phone. they don't get along. as someone said in another thread, it's like giving O blood to an AB+ patient... bad things happen.
your best chance is to put it into bootloader mode by holding power+volume down while pressing the reset button with your stylus and then trying to flash the stock sprint rom via activesync. if you can't even get that far, you may be boned, my friend :(

Re: Sprint Touch Pro2 Does not boot up
 

Leave phone unhooked from the computer usb.

Take battery out and put back in.

Hold down the power button and volumedown and then press the reset button with the stylus, the tri color boot screen should come up in a second or two.

It will say "serial" down at the bottom of the screen. Plug into USB on computer and it will change to USB.

Now run the Stock Sprint Flash utility on your computer.

Re: Sprint Touch Pro2 Does not boot up
 

Mighty doesn't have a ROM for GSM....idk where you got that from. But yeah, try whats been posted. And next time try to read up a little more

Re: Sprint Touch Pro2 Does not boot up
 

I mean to say I wanted to use GSM , the phone was working fine on ATT after unlocking and putting on the Mighty ROM but it started giving issue after installing the new ROM.

I tried pressing the Power button on the TOP.

The Volume button just above the red reset button and holding them down at the same time.
And the phone was not connected to USB.

Nothin even after 1 mins

Re: Sprint Touch Pro2 Does not boot up
 

did you press (and release) the red reset button while holding those two buttons? if not, that's what you need to do.

Re: Sprint Touch Pro2 Does not boot up
 

Yes I pressed the power key then the volume down key and then pressed the red reset button.

I had all three of them pressed at the same time for 3 mins.
Nothing on screen :(

I bought this phone NIB from ebay 2 days ago, and have not even registered this with sprint yet.

I have contacted HTC for RMA what are my chances of getting it fixed without paying out-of warranty repairs?