PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Touch Pro 2 (http://forum.ppcgeeks.com/forumdisplay.php?f=97)
-   -   Sprint TP2 will sync to WMDC after installing Mightyrom Love (http://forum.ppcgeeks.com/showthread.php?t=113822)

mattsd23 03-11-2010 08:58 PM
Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Hello, Im sure this maybe out in the forums somewhere but I am having trouble finding a fix for my phone and was hoping somebody could help.

I had MightyRoms War on phone and wanted to try Love. Everything was ok for a few days but decided to go back to War...thats when the problem began. Phone will NOT sync to WMDC.

Tried: hard reset;
Tried; updating windows.....nothin, still wont sync

Any help would be appreciated,
Thanks,

Oridus 03-11-2010 09:05 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Quote:
Originally Posted by mattsd23 (Post 1623917)
Hello, Im sure this maybe out in the forums somewhere but I am having trouble finding a fix for my phone and was hoping somebody could help.

I had MightyRoms War on phone and wanted to try Love. Everything was ok for a few days but decided to go back to War...thats when the problem began. Phone will NOT sync to WMDC.

Tried: hard reset;
Tried; updating windows.....nothin, still wont sync

Any help would be appreciated,
Thanks,
I'm working on helping you out now. Look for my PM

bdurst08 03-11-2010 09:11 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Quote:
Originally Posted by mattsd23 (Post 1623917)
Hello, Im sure this maybe out in the forums somewhere but I am having trouble finding a fix for my phone and was hoping somebody could help.

I had MightyRoms War on phone and wanted to try Love. Everything was ok for a few days but decided to go back to War...thats when the problem began. Phone will NOT sync to WMDC.

Tried: hard reset;
Tried; updating windows.....nothin, still wont sync

Any help would be appreciated,
Thanks,
Its a known issue w/ Love. If you know how to flash from the SD you can flash that way back to War and you wont have any problems after that. Also I know that when I flash I dont sync I just make sure that it is recognised. But IMO try flashing from you SD card and that should fix your issue. Also the Mighty Rom project forum should be able to help if my advise couldnt.
Also there is a sticky with instructions on how to flash from your SD Card in the ROM thread.

Hope this helps man!!!

mlin 03-11-2010 09:23 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
if you go into bootloader you will be able to flahs back to war. Just shut off the phone and hold the 'volume down' key while you power on the device

mattsd23 03-13-2010 05:18 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Hello Oridus, thanks for your help with this issue.
i followed these intructions:
A pre-note to this process. Your SD card must be formatted fat-32 (not just fat) for this process to work. formatting your SD card will wipe out all information on it so remember to backup first!

This is actually a really simple process.

Step 0: READ THE WHOLE POST ESPECIALLY IF THIS IS YOUR FIRST TIME!
Step 1: find the rom/radio you wish to flash and download it
Step 2: extract the .nbh file out of said rom package (will usually be named RUU_SIGNED.nbh if the rom is packed in an exe use pocket rar to extract from your phone or 7zip/winrar from your pc)
Step 3: rename the .nbh file to RHODIMG.nbh
step 4: place rom on the root of your SD card (meaning not in any folders)
step 5: power down the device completely
step 6: hold volume down and power (sleep/wake button on the Verizon variant) till the screen boots into bootloader mode (red green blue screen)
step 7: when prompted press power to flash
step 8: wait for it to finnish, sometimes it will restart on its own, sometime you need to restart it yourself but make sure you wait for the flash successful screen.


but on step 7...the phone never prompts me. just stays on the bootloader screen.
???

thank again for your help with this.

razorloves 03-13-2010 05:26 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Quote:
Originally Posted by mattsd23 (Post 1627982)
Hello Oridus, thanks for your help with this issue.
i followed these intructions:
A pre-note to this process. Your SD card must be formatted fat-32 (not just fat) for this process to work. formatting your SD card will wipe out all information on it so remember to backup first!

This is actually a really simple process.

Step 0: READ THE WHOLE POST ESPECIALLY IF THIS IS YOUR FIRST TIME!
Step 1: find the rom/radio you wish to flash and download it
Step 2: extract the .nbh file out of said rom package (will usually be named RUU_SIGNED.nbh if the rom is packed in an exe use pocket rar to extract from your phone or 7zip/winrar from your pc)
Step 3: rename the .nbh file to RHODIMG.nbh
step 4: place rom on the root of your SD card (meaning not in any folders)
step 5: power down the device completely
step 6: hold volume down and power (sleep/wake button on the Verizon variant) till the screen boots into bootloader mode (red green blue screen)
step 7: when prompted press power to flash
step 8: wait for it to finnish, sometimes it will restart on its own, sometime you need to restart it yourself but make sure you wait for the flash successful screen.


but on step 7...the phone never prompts me. just stays on the bootloader screen.
???

thank again for your help with this.
if you need help with flashing from sd card, then read and post in this thread http://forum.ppcgeeks.com/showthread.php?t=95375
there's plenty of reasons why you're having this problem and they're all discussed in that thread

Debi1961 03-13-2010 07:59 PM
Re: Sprint TP2 will sync to WMDC after installing Mightyrom Love
 
Have you tried unchecking "enable faster date synchronization" under USB to PC under Settings>Connections>ActiveSync?


All times are GMT -4. The time now is 10:42 PM.

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0