PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/)
-   HTC Titan (http://forum.ppcgeeks.com/htc-titan/)
-   -   FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work (http://forum.ppcgeeks.com/htc-titan/35358-fixed-cannot-get-into-diag-mode-3424-dmrouter-doesnt-work.html)

fred_dj 08-20-2008 01:24 PM

FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
Hi guys i was trying to do the GPS Fix posted here, but i cannot get into the DIAG mode. Tried all possible combinations, ##3424# ##3424 Send, #*#3424... even thru file explorer > windows > running dmrouter.exe
It doesnt even open... What's wrong with me?

I have the no2chem kitchen WM6 flashed into my titan. And i remember I couold go in diag mode before i flash it.

fred_dj 08-21-2008 12:37 PM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
1 Attachment(s)
Well, I figured this must be something really out of this world. Nobody was able to even reply me with some kind of hope, so I managed to do it myself and I am sharing here for people that run into this problem someday.

For some reason, the ##3424 / ##3424# or (send) link is broken to enter the DIAG mode in my no2chem flashed titan. Then after, I double clicked in the DmRouter.exe file under \windows. No Success again. So.... What you need to do is download the attached file and install this little amazing command prompt shell for WM6. After that you open up the Program call nOpen, Choose the file you want ( \windows\DmRouter.exe ) and in the Command line you enter " /DIAG " and BAM. there's you DIAG MODE page. Good Luck

nick aguas 08-21-2008 12:59 PM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
Quote:

Originally Posted by fred_dj (Post 389959)
Well, I figured this must be something really out of this world. Nobody was able to even reply me with some kind of hope, so I managed to do it myself and I am sharing here for people that run into this problem someday.

For some reason, the ##3424 / ##3424# or (send) link is broken to enter the DIAG mode in my no2chem flashed titan. Then after, I double clicked in the DmRouter.exe file under \windows. No Success again. So.... What you need to do is download the attached file and install this little amazing command prompt shell for WM6. After that you open up the Program call nOpen, Choose the file you want ( \windows\DmRouter.exe ) and in the Command line you enter " /DIAG " and BAM. there's you DIAG MODE page. Good Luck

good find. did you also try running DmRouter.exe by forcing windows to run it? simultaneously press and hold the select button in the 5-way d-pad, and touch and hold the clock/date in the title bar. release the select button and two options, run and clock, will be underneath your finger.

fred_dj 08-21-2008 01:37 PM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
cool. no i didnt know about that

ian1210 04-25-2009 11:57 AM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
This worked well on my diamond

mingyuanpng 04-11-2010 10:14 AM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
thank you ,you kown ,i am from china..

chencho 04-29-2011 08:16 PM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
thanks this was very usefull

Denea92 09-08-2011 02:26 PM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
Thank's a lot. It works great!

freeonrdavin 09-13-2011 03:11 AM

Re: FIXED >> Cannot get into DIAG mode. ##3424 / dmrouter doesn't work
 
This worked well on my diamond
http://www.semservice.org/3.jpghttp://www.semservice.org/4.jpghttp://www.semservice.org/5.jpg


All times are GMT -4. The time now is 07:13 AM.

Powered by vBulletin® ©2000 - 2020, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0