Bluetooth ActiveSync
Trying to get it to work, but when I hit connect via bluetooth in AS on my phone it says there is no PC partnership that supports AS.
Tried searching the forums and google on how to setup but have been unsuccessful. Could someone pleaaasssseeee post a guide. It would be greatly appreciated. |
Re: Bluetooth ActiveSync
Quote:
You have to figure out which COM port the BT Serial Port is on (Mine is COM 3). If you open the BT Configuration and look at local services you should find the BT Serial Port info. Then go into "Connection Settings" on ActiveSync and Check the box next to "Allow Connections to One of The Following" and select the proper COM port. If you re-pair the phone to the computer after doing this, ActiveSync should be one of the available services. |
Re: Bluetooth ActiveSync
Quote:
|
Re: Bluetooth ActiveSync
If you have the little blue/white BT icon in your system tray, just right click on it to find "Bluetooth Configuration". It really depends on how your BT is setup on your system.
|
Re: Bluetooth ActiveSync
Yeah I found it. Well I went thru all that and I see AS in the local services under COM 4. I still can't get it to sync though
|
Re: Bluetooth ActiveSync
Quote:
|
Re: Bluetooth ActiveSync
you tried setting up the partnership under Bluetooth options on the phone first? or just opening ActiveSync and trying it that way?
go to settings, connections, bluetooth and set it up that way, then try activesync again. |
Re: Bluetooth ActiveSync
Ok so I checked device manager, and under Ports it has:
Bluetooth Comm. Port (COM4) Bluetooth Comm. Port (COM5) Bluetooth Comm. Port (COM7) Under AS connection settings, it is set as COM4 |
Re: Bluetooth ActiveSync
Quote:
|
Re: Bluetooth ActiveSync
from http://msmobiles.com/news.php/1679.html
... A few hints: 1 - The adapter does not like being plugged into a hub 2 - Can you pair to your PC? 3 - The Bluetooth icon on your PC turns green when you have an active connection. 4 - Double click the BT icon on your PC. Go to View/Modify Config. Then Local services. Note the BT serial port. 5 - Open Activesync on your PC. Go to file/connection settings and make sure the serial com port is the same as in no4 above. If not change it. Make sure the check box is ticked and the port says it is available. If not choose another port in no4 above. 6 - Go to active sync on your phone. Click menu/Connect via BT. (BT must be on of course). 7 - If that does not work, right click the PC´s BT icon, select Quick Connect/BT Serial port. Then after it connects turn BT off then on (phone). 8 - Good luck. BT is a lot of trial and error, but one thing is for sure, it´s a pain is the ...! |
All times are GMT -4. The time now is 05:41 PM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com