New rom woes.
 

I ran the new room, it stopped at the 11% as expect and then ran on through. It reached 100% and said your new rom is installed, from there I tried to use my phone and I was stuck in bootloader with the 4 colored lines and I cant get out of it, I tried to install my old rom, 2.17, and the computer is saying that my mogul has no disk image mounted, so like, theres no rom on my phone and the rom on the computer wont work. I have 100% bricked the phone and I cant get out of the boot loader. PLEASE HELP ME, FLAME ME, what ever, just please I'm in serious need of some help.

taylor.. no worries. i can almost promise you didn't brick your phone. what operating system are you on? xp or vista?

You've gotta relock to go back to old OS. By the way, there is a way to extract the nbh file, load it to a mini sd and then flash from there.




EDIT by ImCoKeMaN:

The old unlocker doesn't work with this rom, get the update here:
http://forum.ppcgeeks.com/showthread...746#post168746

If you only want the essentials and to remain unlocked you might want to check out this post by shadowmite:
http://forum.ppcgeeks.com/showthread...441#post168441

I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.

To do this there are 3 steps:

First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh

Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.

Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!

I'm on vista.

I cant format my microSD, A. the phone wont connect to the computer so I couldn't even if I wanted to, and also, B. I have a lot of important information on the microSD card.

do you have a camera or printer or something else that can read a microSD card? if not.. you might have to pick up a card reader for your computer or go to a friends pc that can do so to do this method...

i got mine out of the boot loader on vista with some playing around...

did you take your battery out and put it back in? still in boot loader? if so.. try the re-locker posted on the cokemans section on the websites ftp..

just try playing around with it.. you should get it.. or do that flashing via your memory card when you get a chance..

Try to reloc. Plug the phone to the USB and then try to reloc. From most of what I read it's connected even though you don't think it is.

I had this same issue today when I went to install the new rom... What worked for me was the following.
1. Put the phone in bootloader mode... Yes, even if it says it's in bootloader mode
2. Run the bootloader install again.
3. Once it's done re-installing(Happens really quick), disconnect and reconnect the usb cable.
4. Run the rom install again and all should be good.
I had to do a hard reset after this install but once everything came back up, everything worked as it should.

Good luck

thanks for all of the advice guys, I've tried all of what you guys are saying and none of it has worked, I think I might need to buy a microSD card reader like was mentioned. If anyone else has any input, it is great appreciated.

No you don't need microsd to do the work

Download dcd version, it should work

http://forum.xda-developers.com/showthread.php?t=362566

Just run it even the phone is on 3 bar