Android 1.1 working fairly well now
 

For those wanting to kick the tires

Android 1.1

- still uses HaRET to boot from inside WinMo off storage card
- still no wifi/gps/bt

data, calls, sms, keyboard, rotation, battery, usb, sound working well. I was able to boot to android, sync my contacts/calendar from google, use the marketplace, browse, etc on AT&T/Tilt.

http://forum.xda-developers.com/showthread.php?t=396782

http://www.androidonhtc.com/kaiser:install

(get the 4/28 build here)
http://www.androidonhtc.com/kaiser/latest_builds

Edit: I had nothing to do with this, other then tipping the hat to the folks doing the actual work....

Re: Android 1.1 working fairly well now
 

is anyone successful with Android and WinMo 6.5?

Re: Android 1.1 working fairly well now
 

It works fine using 6.5... Android isn't ran in WinMo. You launch the Haret boot loader in WinMo and it reboots your device into Android.

Re: Android 1.1 working fairly well now
 

I know this, i've done it several times over and over and over, and still have no success. I've probably tried booting Android about.....50+ times,and only got it to boot once :(

Re: Android 1.1 working fairly well now
 

I slapped on the kaiser_wwe_shifu_05_3g rom, with 1.65x radio on AT&T on a 2gb Fat32 formatted card and she boots up every time. Been running it for a day now, its solid. Overnight battery drain was 13% (in 10+ hours - sigh, if only the TP could do that)

Yay, finally a use for my at&t tilt :p

Anyway, might want to try it one more time, it does work

Re: Android 1.1 working fairly well now
 

could you post your default.txt file please?

Re: Android 1.1 working fairly well now
 

Android Carrier Settings:

http://www.androidonhtc.com/carrier_network_settings


I also had to set the APN settings manually in Android then launch Togga.


My default.txt (My provider is Cincinnati Bell):

#alloctest 0x2000
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL zImage
#set initrd "initrd.gz"
set initrd "\Storage Card\initrd.gz"
#set initrd "\Storage Card\initrd-console.gz"
#set initrd "\Storage Card\android.bin"
#
# The following kernel parameters are useful
# ppp.username - The username used to connect to the network when dialing #777
# ppp.password - The password used to connect to the network when dialing #777
# msm_sdcc.msmsdcc_fmax - The maximum frequency (in Hz) used by the SD controller
# pm.sleep_mode - The mode used when the phone is off
# 0=Power Collapse Suspend, 1=Power Collapse, 2=Apps Sleep,
# 3=Slow Clock and Wait for Interrupt 4=Wait for Interrupt
# Default is 1, use 1 for best power savings
# board-htckaiser.panel_type - Panel type used to power the panel off and on
# 0=Don't power off the panel (Default)
# 1=Sony 2=Topoly 3=Topoly (probably just the same as 2)
#
set cmdline "board-htckaiser.panel_type=0 ppp.apn=wap.gocbw.com ppp.username=cbw ppp.password=none pm.sleep_mode=1 mddi.width=320 mddi.height=428 no_console_suspend board-kaiser-keypad.atttilt=1"
boot

Re: Android 1.1 working fairly well now
 

Seems like anyone else that had this problem was able to fix by:

Extracting/Unzipping data.gz and rename the data file: data.img

Re: Android 1.1 working fairly well now
 

even with the new version I still get "Failed to extract Data Image" ... using vouge
and with the mogul It show starting vouge linux and the SD time out...

/sigh

Re: Android 1.1 working fairly well now
 

I used the same page to set up the AT&T Settings...

I have to have a data connection in windows before I fire up andriod, and I need to manually run the whatever its called (tonga?) thing to connect to my self-entered at&t "access point" per that web page above.

Once that's done it stays connected just fine.