Kitchen?

[jonharm]

I'm playing with this right now. You should start this as a new post, for sure!

Originally Posted by jtuite

I have put together a kitchen based on the new ervius visual bepes kitchen,
I do not have an imagio so I cannot test it out, it builds the ROM from start to finish and I got the system files and XIP from joojoobee666 so they should be good. all the files are stock so if you want pretty looking icons and bootscreens you will have to add them yourself, I also added Sense 2.5 for those that want it. again I can't guarantee that this works 100% and you will have to do your own tweaking to get it how you like it.

Imagio_Kitchen

big thanks to whoever made the Kitchen (don't know if it is erius or bepe or both) thanks to joojoobee666 for providing the XIP and SYS, to everyone that threw in their knowledge on creating a kitchen from scratch I couldnt have done it without the geeks on ppcgeeks.


DISCLAIMER:
I am not responsible for your device, use this at your own risk

I couldnt get the kitchen to boot after building the ROM. Looking into it.

[jonharm]

Ditto here.

Originally Posted by jobehonda

I couldnt get the kitchen to boot after building the ROM. Looking into it.

[jtuite]

Originally Posted by jobehonda

I couldnt get the kitchen to boot after building the ROM. Looking into it.

might need to play with the xip, I will see if I can get another one somewhere. if someone figures it out before I can get around to it please post the solution.

try replace the SYS in the kitchen with this one and replace the shared folder in the ROM folder with this one. hopefully it will boot after that.

jtuite..trying that now building the ROM will report back.

in my BUILD_LOG.txt I am getting this:

ERROR: Not enough space in Slot 0!

followed at the end of the build:

ERROR! (errorlevel: -1073741819)

ERROR executing: kitchen_build_rom.bat

ERROR!!!
Wait some seconds...

No ''SVN'' folders present...

Restored Original config.txt...
Temp config.txt Deleted!!!

ok ignore above, screwed up a file, after fresh load of kitchen and SYS and SHARED copied over I have a good .NBH. I am flashing now.

[jtuite]

Originally Posted by jobehonda

jtuite..trying that now building the ROM will report back.

in my BUILD_LOG.txt I am getting this:

ERROR: Not enough space in Slot 0!

followed at the end of the build:

ERROR! (errorlevel: -1073741819)

ERROR executing: kitchen_build_rom.bat

ERROR!!!
Wait some seconds...

No ''SVN'' folders present...

Restored Original config.txt...
Temp config.txt Deleted!!!

I think that it means it has too many modules in the sys, I am recmoding some modules and will reupload the sys folder

even after loading over the SYS and SHARED folder, I am getting a stuck boot on HTC.

[jtuite]

Originally Posted by jobehonda

even after loading over the SYS and SHARED folder, I am getting a stuck boot on HTC.

is it farther than before or is it stuck at the same place?

same place. i made some adjustments, I am rebuilding now, will reflash in a second.