HOW TO: Bootloader and hard reset without the stylus!
 

*** Updated*** Moved instructions to the top to make this easier to read. Added headings to sections.
*** Updated*** Added list of symptoms that may required going into bootloader. Meatgel's idea, Post #13
*** Updated*** Added a section of other supported devices

+++Instructions+++
The key is, the phone needs to be powered down, not just the screen.
These are some of the ways to power down your phone.
1) If you have psShutXP installed, you can select "Shut Down".
2) or, Push and hold the power button. You will be warned that you're shutting down the phone.
3) or, Remove the battery.

Once you're phone is powered down, decide which mode you want to go into.
Make sure the "PowerButton" is the last button you push and hold, since that will turn your phone on.

Note: Push and hold all the corresponding buttons to activate selected mode

Bootloader = VolumeDown + PowerButton
Triggered Bootloader = VolumeDown + BackArrow + PowerButton
Hardreset = VolumeDown + OK + PowerButton


+++Extra Info - Just FYI+++
I decided to start a thread on this topic because I've seen a lot of discussion regarding the difficulty of doing this on the Diamond.

You don't need the Stylus to put your phone into bootloader or to do a hard-reset.
I didn't figure this out, I simply saw what cornelious2 wrote in his thread, and decided to try it w/ other methods.
I flash my phone so often I was concerned about removing the cover constantly to start bootloader or do hard resets.

I was reading the tutorial by cornelious2 (http://forum.ppcgeeks.com/showthread.php?t=40490) about flashing from the 4 gig storage, and he mentioned this method.

The way bootloader/triggered bootloader/hard-reset works is the fact that you are holding down certain buttons while the phone powers up.
Using the stylus to reset the phone is just a way of making the phone shutoff and turn back on while you are holding the buttons.
So, if you have your phone powered down and hold the appropriate buttons while powering the phone back on, you will enter whatever mode you want.

Just to reiterate what cornelious2 said, Triggered Bootloader is what you use when you want to flash a rom from the internal storage.
You just take a RUU_Signed.nbh and rename it DIAMIMG.nbh and place it on the root of your internal storage folder.


Symptoms that may mean you need to force bootloader: (credit to Meatgel)
Stuck on the screen with red letters
Soft reset turns to a hard reset
You're in a re-boot cycle
Anytime you pull the battery from a freeze and the phone doesn't boot correctly

After you put your phone in bootloader it may be best to flash to a stock or shipped ROM before flashing to your choice of custom ROMs.

+++Devices that can use this method+++
These devices can enter bootloader or hard reset using the correct button combination for that device, w/o the stylus.
If anyone has more info, please let me know, and I'll update this list.

Same steps apply.
Power off the phone, and then press and hold the correct buttons, pushing the power button last.
If you're not sure how to power down your phone, remove the battery.

Devices
HTC Apache - Bootloader and Hard reset
HTC Vogue - Bootloader and Hard reset
HTC Touch Pro - Bootloader and Hard reset

Re: Bootloader and hard reset without the stylus!
 

Just too clear this up...you have to rename it to DIAMIMG.nbh not DIAIMG.nbh

Re: Bootloader and hard reset without the stylus!
 

Opps, I fixed it.

Re: Bootloader and hard reset without the stylus!
 

works like a champ... first internal flash is a success.. too sweet...

-renamed the file, placed /internal storage
-powered down
-powered up using Trigger Bootloader = VolumeDown + BackArrow + PowerButton

boom... super quick too.

Re: Bootloader and hard reset without the stylus!
 

Awesome find! Definitely saves some fumbling around with the dang stylus... and works like a champ. Thanks

Re: Bootloader and hard reset without the stylus!
 

Thanks ... great write up ... should be made a sticky in the upgrade section. If only people would read the stickies!

Re: Bootloader and hard reset without the stylus!
 

There is even an easier way. Just copy the file Enterbootloader.exe (from any Rom update package directory) to your Internal Storage and run it. If hardreset is needed then run the clearstorage app in setting.

Re: Bootloader and hard reset without the stylus!
 

I added a section of other devices that support this method.

For those that are not familiar w/ the Touch Diamond, the reason this is significant, is that the reset button is behind the battery cover.

Unlike the Apache/Mogul/Touch/Touch Pro and I'm sure several others, the Diamond is a bit of a hassle to hit the reset button since you have to remove the battery cover.

Re: Bootloader and hard reset without the stylus!
 

excellent stuff. simple and in kiddy terms, jus like i like..lol..but seriously..this post helped make my first flash today that much easier(gota love a 512mb sd card formatted to fat32:mrgreen:)

Re: Bootloader and hard reset without the stylus!
 

Just take the battery out and then put it back in and immediately press power+vol down+enter(big round button). It should hard reset ..works every time.