PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/)
-   HTC Diamond (http://forum.ppcgeeks.com/htc-diamond/)
-   -   MSL not unlocking Sprint Diamond after flash... no internet (http://forum.ppcgeeks.com/htc-diamond/42839-msl-not-unlocking-sprint-diamond-after-flash-no-internet.html)

ismhawk 11-03-2008 09:51 AM

MSL not unlocking Sprint Diamond after flash... no internet
 
i flashed mighty rom 2.1 which has the generic rom settings, i downloaded DCD sprint carrier settings cab, and after doing all of that my internet got flaky with error 67 and 1012...

i flashed back to the stock rom of sprint, which reset my PRL as well as my radio back to 1.00 from 1.03 vrz, so i figured that it would be an all over fixing process so i can start fresh...

i checked device info and my username is no longer what it should be so i figured go into my settings using the ## code and change it...

i read through possible internet fixes but for that to work i would need my MSL to unlock the phone, i used the Get SPC for my msl, tired that number did not work, i tired the reg edit to create the log to get the MSL and its the same number, still did not work... i called into sprint and the MSl they gave me was still the same and it was not unlocking the phone...

i have not been able to find anything anywhere even by doing a search, but nothing is telling me what would change my device so that it no longer took my MSL code...

any help would be great needed, even if its to say im a noob and what i should have searched for... saying something is better then nothing

(sprint said to take the phone in and get it exchanged, but i refuse to give up with out trying everything first thats to much of a cop out)

cornelious2 11-03-2008 10:26 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
did you do ##778# then msl or ##msl# try it whichever way you didnt do it before. also for craps and giggles try ##778# then 000000 for the msl.

ismhawk 11-03-2008 10:27 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
Quote:

Originally Posted by cornelious2 (Post 493218)
did you do ##778# then msl or ##msl# try it whichever way you didnt do it before. also for craps and giggles try ##778# then 000000 for the msl.

the sprint rep ran me through ##778# as well as ##000000# and ##msl# and 3 other type of codes and still to no avil

rikk0 11-03-2008 01:08 PM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
i wish i could remember exactly what they told me to do over the phone, but, when i bought my diamond at best buy the internet wasnt working. he instructed me to press ## something, then enter what i think was my MSL, then go to a certain screen and choose reset the settings to default. then my internet was working. reason im saying all this is that i was surprised it wasn't the usual ##778# that I was expecting to dial. wish i could be more of help. sorry.

ott 11-03-2008 06:00 PM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
I fixed it! you need to get access to your MSL or take it in to the Sprint store and get them to do this. But you will go in and ##3282# or ##DATA# and then you will need to change the "Active Profile" from "0" to "1". Give that a shot and let me know what ya find out. If the people at the store tell you different you let me know and hold onto that phone cause this should fix it.

rainfreak 11-03-2008 06:51 PM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
Quote:

Originally Posted by ott (Post 494171)
I fixed it! you need to get access to your MSL or take it in to the Sprint store and get them to do this. But you will go in and ##3282# or ##DATA# and then you will need to change the "Active Profile" from "0" to "1". Give that a shot and let me know what ya find out. If the people at the store tell you different you let me know and hold onto that phone cause this should fix it.

Yeah... this fix has been known for awhile... read the very first post and trust me :)

http://forum.ppcgeeks.com/htc-diamond/37642-internet-not-working-possible-fixes.html

ismhawk 11-04-2008 09:38 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
this is what i have tired on my phone after clicking on edit

##3282# msl code fails, 000000 code fails 111111 code fails
##778# msl code fails, 000000 code fails 111111 code fails
##000000# no responce...
##846524# or ##msl# no responce
##111111# no responce

so to go to anything to make an edit i need to figure out why my phone is no longer taking its MSL code...

as stated in the 1st post getspc, the reg edit log hack, as well as CS have all produced the same number of 846524 and entering that number into the unlock screen does nothing but fail out...

so to fix my internet i know what the sticky thread says, but I NEED TO ACCESS the correct areas to edit them...

so does anyone know why the MSL code is not working and how i can get it to work again... is a proably a better way to ask the issue

rainfreak 11-04-2008 09:39 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
There is a registry hack that works to get your MSL... let me look for it...

Found it:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r
  • The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows. 826202

ismhawk 11-04-2008 09:58 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
Quote:

Originally Posted by rainfreak (Post 495476)
There is a registry hack that works to get your MSL... let me look for it...

Found it:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r
  • The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows. 826202

yea tried it... it gave me the same msl as getspc and the same msl as the sprint rep gave me...

is there a way to get a new MSL, make the old one work, or bypass it so i can make edits?

thanks for trying to help me out because this just seems weird

rainfreak 11-04-2008 10:05 AM

Re: MSL not unlocking Sprint Diamond after flash... no internet
 
Wow, then I have no clue. I have never seen or heard of a phone that changed its own MSL. If it were me, I would make sure it ahs a stock rom on it and then call customer service again. When they realize that there is a problem, I would ask them to ship you a new replacement.


All times are GMT -4. The time now is 02:18 PM.

Powered by vBulletin® ©2000 - 2020, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0