PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Diamond (http://forum.ppcgeeks.com/forumdisplay.php?f=66)
-   -   [UPDATED Added Files] FULL SUCCESS! SuperCID and QPST for NV EFS access (http://forum.ppcgeeks.com/showthread.php?t=36407)

Mr. X 09-03-2008 11:07 AM

[UPDATED Added Files] FULL SUCCESS! SuperCID and QPST for NV EFS access
 
SuperCIDing

Prerequisite
1. The Phone should have Hard SPL MFG (For Diamond 0.43 HardSPL MFG)

SuperCIDing
1. Disable USB in Connection Settings of Active Sync
2. Boot The Phone in bootloader mode.
3. Connect Phone to PC
4. start mtty.exe
5. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive)
6. run command rtask a : After this Command Phone will not Display any thing
7. run command echo_on : even though nothing is shown to screen
8. run command readCID : in Telus it will display TELUS001
9. run command writeCID 00000000 : Set CID Value to 00000000 replaces TELUS001 in Sprint (This make PPC Radio Security Level to Zero)
10. run command readCID : This will Display the Update CID as 00000000
11. run Command retuoR : This will return to Original Boot Loader State
12. run command rtask c : This will Activate Phone Radio and then we can Access Diagnostic Port and Set NV Items
Issuing rtask c Command Put the Radio of Phone to ON State so we can have Radio NV Command work properly



Getting NV Folder Access In QPST EFS Explorer


In QPST EST File Explorer Just Create the Following Directory in root ( \ )

open sesame door


After Creating open sesame door directory in root of Phone Reboot and again try to access the NVM Folder


Here are all the files you need in a nice RAR file, this includes OPST, Qualcomm USB Drivers, CDMA Work Shop and GETSPC


Thanks To hetaldp, no2chem, and Puff for testing as well and giving me little hints.

Mr. X 09-03-2008 07:41 PM

Re: SuperCID and QPST for NV access
 
Quote:

Originally Posted by ghettofreeryder (Post 403114)
you need a hard spl and rtask

i figured. its in the CDMA rom. and my skills in mtty are limited. especially with the htc bool loader so ill have to start reading. maybe look on some xda wiki sites.

no2chem 09-04-2008 05:03 AM

Re: SuperCID and QPST for NV access
 
Quote:

Originally Posted by Juggalo_X (Post 403118)
i figured. its in the CDMA rom. and my skills in mtty are limited. especially with the htc bool loader so ill have to start reading. maybe look on some xda wiki sites.

you need the MFG spl. If I have time, I might be able to run you through it. Its not something you can leave on peramently though.

Mr. X 09-04-2008 09:12 AM

Re: SuperCID and QPST for NV access
 
Quote:

Originally Posted by no2chem (Post 403521)
you need the MFG spl. If I have time, I might be able to run you through it. Its not something you can leave on peramently though.

have any suggested reading for me? :)

Mr. X 09-04-2008 10:47 AM

Re: SuperCID and QPST for NV access
 
thanks for reopening my thread :)

No2Cham can you explain to me what the MFG SPL is and how it differs from the SPL we use to unlock the device for provisioning and qpsting

hetaldp 09-05-2008 06:36 AM

Re: SuperCID and QPST for NV access
 
TRY THIS

SuperCIDing

Prerequisite
1. The Phone should have Hard SPL MFG (For Diamond 0.43 HardSPL MFG)

SuperCIDing
1. Disable USB in Connection Settings of Active Sync
2. Boot The Phone in bootloader mode.
3. Connect Phone to PC
4. start mtty.exe
5. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive)
6. run command rtask a : After this Command Phone will not Display any thing
7. run command echo_on : even though nothing is shown to screen
8. run command readCID : in Sprint it will display SPCS_001
9. run command writeCID 00000000 : Set CID Value to 00000000 replaces SPCS_001 in Sprint (This make PPC Radio Security Level to Zero)
10. run command readCID : This will Display the Update CID as 00000000
11. run Command retuoR : This will return to Original Boot Loader State
12. run command rtask c : This will Activate Phone Radio and then we can Access Dignostic Port and Set NV Items

Issuing rtask c Command Put the Radio of Phone to ON State so we can have Radio NV Command work properly

DONT Forget to say Thanks

hetaldp 09-05-2008 06:40 AM

Re: SuperCID and QPST for NV access
 
This is for Touch / Vogue

http://www.mobile-files.com/forum/sh...68&postcount=1

This is for Mogul


http://www.mobile-files.com/forum/sh...4&postcount=82

Mr. X 09-05-2008 10:16 AM

Re: SuperCID and QPST for NV access
 
Quote:

Originally Posted by hetaldp (Post 404595)
TRY THIS

SuperCIDing

Prerequisite
1. The Phone should have Hard SPL MFG (For Diamond 0.43 HardSPL MFG)

SuperCIDing
1. Disable USB in Connection Settings of Active Sync
2. Boot The Phone in bootloader mode.
3. Connect Phone to PC
4. start mtty.exe
5. Select All Default and Connect to USB in drop down box and Shoot the Following Commands (All Commands are case Sensitive)
6. run command rtask a : After this Command Phone will not Display any thing
7. run command echo_on : even though nothing is shown to screen
8. run command readCID : in Sprint it will display SPCS_001
9. run command writeCID 00000000 : Set CID Value to 00000000 replaces SPCS_001 in Sprint (This make PPC Radio Security Level to Zero)
10. run command readCID : This will Display the Update CID as 00000000
11. run Command retuoR : This will return to Original Boot Loader State
12. run command rtask c : This will Activate Phone Radio and then we can Access Dignostic Port and Set NV Items

Issuing rtask c Command Put the Radio of Phone to ON State so we can have Radio NV Command work properly

Changing ESN
  1. Now Just run CDMA-Workshop 2.7 cracked and Connect to Disnostic Com Port
  2. Click to Read Button for 2 to 3 time to see the Port is Responding
  3. go to Security Tab and Write NEW ESN using nv_write Method
  4. Exit CDMA_Workshop this will ask to Send Reset command to Phone Just click and you have done it.
DONT Forget to say Thanks

thanks forthe reply. im not trying ot change the esn. so you can edit that part out its against the rules i just wanted to have CID accessto NV. it was locked and i didnt want it to be i wanna play :D


I cannot get mtty to detect the diamond i must be missing some drivers.

Mr. X 09-05-2008 10:51 AM

Re: SuperCID and QPST for NV access
 
after some poking around i found a beta version of mtty that detects the diamond. (never had issues with 1.43 before)

will report my findings back

EDIT: i dont think its connecting to the Diamond correctly. ill try my xp computer shortly.

this is what i get

"rtask a
rtask a
Command error !!!

Cmd>rtask a
rtask a
Command error !!!

Cmd>?
?
Command error !!!

Cmd>help
help
Command error !!!

Cmd>"

Mr. X 09-05-2008 11:01 AM

Re: SuperCID and QPST for NV access
 
Ive tried the suggested command strings with no luck. i always get command error

i know the diamond is connecting to mtty because when i open mtty it has the usb option. if i unplug the diamond and open mtty usb option is gone.

either im doing it wrong or this method will not work to change superCID


All times are GMT -4. The time now is 03:22 PM.

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0