Error 100/150 loading ROms

[bjeff05ster]

Hi
Discovered the kitchens a few days ago. Tried to upgrade a few times and kept getting "error 150 Wrong device" on all but the official Telecom Rom.
After a bit of checking it seemed theb V1.0 of bootloader was the problem so I tried the upgrade in "BootloaderFix" .
It upgraded me to V1.02 but now I can't load any ROMS I get either Error 100 or 150 depending which one I try.

Can anyone help?

[PDAPhoneJunkie]

Hi. Are you using the WM6.1 kitchen? Make s you select the right REV version and you might want to use No_Id drivers.

[bjeff05ster]

Thanks
I.m using 6.1 and newly installed (and updated) kitchen, tried standard and no_id, neither worked b4 I changed the bootloader and neither work now both say its wrong device

[PDAPhoneJunkie]

Do you have the REV set to v1.02?

[bjeff05ster]

Yep definitely changed the REV to 1.02 (on all attempts) sorry meant say that in last reply.
I've tried a couple of diffeernt cooked roms (beyond the official one) and all tell me I'm trying to use the wrong ROM for the device - all except the bootloaderfix -which i did run a second time and it still left me with v1.02.
Thanks for the reponse having spent lots of time searching this form I have to say you guys are doing a fantastic job

[gguruusa]

Originally Posted by bjeff05ster

Hi
Discovered the kitchens a few days ago. Tried to upgrade a few times and kept getting "error 150 Wrong device" on all but the official Telecom Rom.

Link to official Telecom Rom, please.

[bjeff05ster]

The link is Telecom New Zealand: http://www.telecom.co.nz/binarys/apa...-2-release.zip

[bjeff05ster]

I'm still trying to unbrick this. I've looked at the output from mtty command after the bootloader fix.
My FAT2 size is larger than in the instructions ie 2c70000 vs 2900000
which i suspect puts me beyond the 64k limit and thus is causing the error message
Am i close can i change this? the output is pasted here?
USB>task 28 55aa
task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0xA00000
FAT2 Size: 0x2C70000
All Size: 0x7770000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000,FAT2_ADDR=0 x4B00000

Cheers Bernie

[bjeff05ster]

Well now i found the c:\RUU.LOG and this the last few lines from the no_id utiility in the bootloader fix. This is the last few lines but there were several "cant find USB port".
I'm running this on VISTA do i need to find a XP machine instead?

16:23:08:502 [msg] : Open USB and COM Port Error. [2]
16:23:08:518 [msg] : Update Image. CE : [4], MSystem : [2], Radio : [1]
16:23:14:258 [msg] : Check Ac in BL mode. AC : [2]
16:23:15:772 [msg] : IsBL. BL : [1]
16:23:15:850 [msg] : =============================================
16:23:15:850 [msg] : START UpdateRadio !
16:23:15:850 [err] : Check SecurityPassword Error.
16:23:15:865 [msg] : START UnInitialization !
16:23:15:865 [msg] : END UnInitialization !
16:23:15:928 [msg] : IsBL. BL : [1]
16:23:15:928 [msg] : START BackCEMode !
16:23:15:943 [err] : BL Set BackCE Flag Error.

Any help or advice appreciated

[bjeff05ster]

So now i copied the telecom nbf files into the bootloader fix directory and got the following log :
16:43:46:937 [msg] : Version : [2.20].
16:43:46:953 [msg] : Config Info : [658065],[1],[0],[0],[1],[0],[0],[1],[0].
16:43:53:317 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
16:44:03:327 [msg] : Disconnect ActiveSync .... [1]
16:44:03:327 [msg] : Start Get Connect Port.
16:44:06:166 [msg] : Current in BL Mode. Open Port : [\\?\usb#vid_045e&pid_00ce#5&3478afd2&0&2#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}] OK.
16:44:07:726 [msg] : START BackBLMode !
16:44:08:584 [msg] : END BackBLMode !
16:44:08:584 [msg] : Device BL VER : [1.02 ] [].
16:44:08:584 [err] : Device ModelID Error.
16:44:08:599 [err] : Image BL Error.
16:44:08:599 [msg] : START UnInitialization !
16:44:08:599 [msg] : END UnInitialization !