How To Flash Your Touch Pro
 

NOTE -- PLEASE MAKE SURE YOU UNLOCK YOUR PHONE BEFORE FLASHING TO A CUSTOM ROM!
USE THIS THREAD TO UNLOCK --wow

see post 50 for indepth detaild instructions provided by egoldy

How to Flash Via PC:

1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there

If that fails please trying these directions (thanks sn0b0ard)

1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!


Flash from microSD Card (Thanks to MadlyAlive):

1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.

Re: How To Flash Your Touch Pro
 

moved to post 1... thanks madly leaving here so your thanks stay

--wow

Re: How To Flash Your Touch Pro
 

LOL you got jokes .....

Re: How To Flash Your Touch Pro
 

No jokes, just help :)

Re: How To Flash Your Touch Pro
 

I see that now ... I have a habit of making a thread then reserving post in it so I thought this was payback lol

Re: How To Flash Your Touch Pro
 

I updated to the Raphael_CDMA_HSPL_037 to unlock. Then tried flashing both ways described above. When I try the way JD recommended, I get a 0% on both my HTCTP and my computer, but it never goes any further and eventually errors out and my device resets to normal. When I try the SD card way I see the rainbow colored screen. Something flashes just for a brief second like no image found, but its so quick, I can't tell for sure if thats what it says and then just sits on the rainbow colored boot loader screen until i do a soft reset. My storage card does indeed have JD's image renamed just as mentioned above in the root directory of the SD card. Any ideas? Since flashing the Raphael_CDMA_HSPL_037 I have not done a hard reset, is that neccessary to make all this work?? Thanks,

Re: How To Flash Your Touch Pro
 

A hard reset shouldn't be needed. As long as the rom is good, it should flash just fine from the SD card. I have yet to try it on the Touch Pro (waiting for a stock shipped sprint TP rom) but it worked exactly the same way on the diamond but had DIAMIMG.nbh instead.

Re: How To Flash Your Touch Pro
 

Don't forget to make sure your GF has Big Boobs and have her lift her shirt in front of the TP.

Re: How To Flash Your Touch Pro
 

hahaha

Re: How To Flash Your Touch Pro
 

even better, wife with no bottom sittin on your lap while you flash. Don't matter what goes wrong you won't get mad :-D