[TESTING] - NAND OMGB (1.2.3)
3 Attachment(s)
This is a testing thread for OMGB. Here is what this build is all about. I'm quoting "r2doesinc" and adding my own comments relative to our build. This build was made with full permission of the OMGB dev team.
This is for all you guys out there who want their phone slim, sleek, and fast.
http://rhodium-nand.googlecode.com/f...3-01162012.zip http://rhodium-nand.googlecode.com/f...E-02012012.zip Latest version 1.2.3( May 4 2012) Latest http://rhodium-nand.googlecode.com/f...3-05042012.zip You will need the following to get started (LK, Recovery and of course OMGB). http://rhodium-nand.googlecode.com/files/RHODIMG.NBH http://rhodium-nand.googlecode.com/files/cwm_recovery_latest.img http://rhodium-nand.googlecode.com/files/GAPPS.zip Instructions are simple. README. Important Notes 1 - GPS was removed from 1.2.3. However, here is a link to add it back via recovery if you want to test it. Its still a little buggy 2- CDMA rhods - I strongly recommend updating your radio to the latest vz radio. 4 - If you find your touch screen is not very accurate. You may need to calibrate it. Download our calib app here |
Status of build
What is not working. This was stolen from Manekineko's list (thanks dood)
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Thanks ACL! Nice to see you getting this posted here.
You want to put a link to the build in post #1? ..edit.. nvmind, "links coming soon" :>)) Also, count me in for some testing if your short. Thread rated & posts thanked LQ Netflix here I come .. hehehe Keep up the good work. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
So the main files are on but one thing i completely forgot was gaps.zip. I'll upload this when i get a chance.
The first boot is slower since everything needs to be installed. After that is done the boots are pretty fast. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
wow , this is great, download and try now
RHODIMG.NBH file error, can not flash in, only 186kb, rhod not recognize now I use date 5/17 RHODIMG_NORECOVERY.NBH, not work |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
So flashing the older NBH without recovery worked? Do you have that NBH handy...? I tried to dig up an older NBH with LK in it - not sure what I have lying around, but it didn't work whatever I was using lol. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
Im going to upload different versions of this thing tonight. Zip them up so we have a crc to check against. Also if you guys wanna help fix this issue, all you need to do is play around with the tinboot script. THis was the last commit that helped us get LK to be small. https://gitorious.org/tinboot-for-li...4d4e8a0adc09d2 |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
This isn't my "normal" card, but still. Sorry dude... I'm betting this will work now. Yup! Now at the miniPoopLoader blue screen :D. Weird, first few boots seemed to hang... then it went past that & a device finally popped up on the PC. Flashing now! Maybe I just need to get the hang of this. Took a few more reboots to get into recovery, but I made it to CWM and am flashing OMGB now! Did you ever grab gapps? Can I just get 'em from the CM site...? Scratch that, just saw your post. Grabbed gapps, flashing those now too! w00t! |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
Anyways i gotta step out but GAPPS is up if you get that far into it today. :-) :headbang: |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
So far it works great. Theme chooser is slick, USB mass storage "just works"! Awesome job dude. Will keep putting this thing thru the ringer :D. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
WTG ACL!!! Got it to boot up, need to go back and install gapps...(just did)
When I reboot from recovery, I still get the "END CALL KEY was PRESSED... fastboot_init(), udc_start()" ... then have to remove battery to reboot. After that, booted fine. Can we use the old root update zip? Going to play with more, will report any findings |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
So one issue - the end key doesn't seem to work as home...? It seems to do nothing. Might be this tester phone, I dunno. I'm going to flash this on my main phone and see how it goes. Thanks a bunch ACL, you haz donation :D. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
How do I install this to my TP2
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
Quote:
Just a random question - LED I would assume indicates sleep state again...? It's always orange for me. Oo... making a phone call doesn't seem to work out well. The UI seems to think the radio shuts off, and there's no trace of a call on the screen. I had it go into airplane mode on the last call attempt - strangely enough the call does go thru. But there's no way to control the call on the phone lol. In addition, data seems to be a bust. This is a freakin awesome starting point tho - it runs really quite well... |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
my 4gb sdcard can not be used to flash ](*,) |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
step 2: power down the device completely step 3: hold volume down and power till the screen boots into bootloader mode (red green blue screen) step 4: when prompted press power to flash Does i did wrong, step 4 not prompted me anything, seems I encount same problem with this: http://forum.ppcgeeks.com/htc-touch-...-8gb-card.html Does we can make an nbh file that support flash with USB ACL, does git tinboot2.S and tinbootLK.S is the neweast, I want to try make an new NBH for usb flash method need LK.BIN |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
Your question was answered on my first post. Install LK, boot into recovery and install omgb. Simple.. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
I got your donation so ill prob get a boost account again so this can be tested :-) thanks bro .. :headbang: |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
I sent you a logcat, logcat -b radio and a dmesg. Let me know if you want moar. I can certainly pull moar... |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
omg..sweet...thanks for the sneak peak.
Will be extensively testing the thetering feature ;) at |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
ACL,
I see OMGB and OMFGB on github - is there a project tree somewhere for the port to rhod_w? |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
https://github.com/acl/device_htc_rhodium i need to push some latest changes but thats about it. Most of the work went into the sensors libs. Rest is old news.. ANything specific you wanna tackle? let me know and ill try to fill you in. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
1 Attachment(s)
with LK.BIN, now my NBH can be flash by USB.
same problem with arrrghhh, make a call, com.android.phone FC, and need to reboot, otherwise phone can't be use. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
Can you still flash via SD? Would be nice if both methods worked, so that way people can use whatever method they prefer :D. Oh, the RIL needs some lovin. Thanks for the logs, they should help ACL out! |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
But anyhoo, I was wondering if you made any changes. He sent me the lk.bin file as well, but I'm curious if you needed any modifications to produce an NBH that can flash via USB.... |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
I'm in a similar situation as you except i can only flash from SD (well not similar but opposite situation). lol:mrgreen: |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
1 Attachment(s)
Just use previous version of makelk.sh to create.
|
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
We're trying to get an NBH that works both ways, so everyone can use it without issue. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
just revert script back to last version , no other change.
https://gitorious.org/tinboot-for-li...4d4e8a0adc09d2 |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
No offense, but that's not really a solution. Thanks tho. |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Here is my take on it so far.
-flashed from sd card without an issue. -installed OMGB from recovery -really digged the 3D boot splash :D The phone boots into andoid just fine. Issues: - stuck in roaming -freezes after about 1-2 minute, even after multiple restart and reflashing. main issue: My phone always wants to boot into fastboot. Even when I hold the Powe button, it still says End Key pressed, not all the time though. I am thinking my end button is broken lol Do you press and hold the Power button while booting the phone the whole time until u get to recovery? When I reboot my phone, somes times I boot into android, most time i boot into fastboot. to be honest, have not really been able to test the system. gonna try a new sd card. on RHOD400 Sprint thanks |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
I am so tempted to flash this, but i only have one device and I would be handicapped without a functioning phone. Good freaking job though! |
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
Quote:
|
All times are GMT -4. The time now is 11:49 AM. |
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com