PPCGeeks
Page 3 of 163 12 3 451353103 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   [TESTING] - NAND OMGB (1.2.3) (http://forum.ppcgeeks.com/showthread.php?t=147260)

[ACL] 10-01-2011 09:49 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by x12CHRIS18x (Post 2148185)
How do I install this to my TP2
not to be a dick but this isnt for you. I dont want to fill this thread up with questions as to how this and how is that. When you see this thread change from "DEV" to "ROM", then you can jump in.

Your question was answered on my first post. Install LK, boot into recovery and install omgb. Simple..

[ACL] 10-01-2011 09:52 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by arrrghhh (Post 2148189)
Yea, but long press doesn't bring up recent apps. Not the end of the world.



Directions in the first post. See the other NAND thread as well. This is still pretty experimental...


Just a random question - LED I would assume indicates sleep state again...? It's always orange for me.

Oo... making a phone call doesn't seem to work out well. The UI seems to think the radio shuts off, and there's no trace of a call on the screen. I had it go into airplane mode on the last call attempt - strangely enough the call does go thru. But there's no way to control the call on the phone lol. In addition, data seems to be a bust. This is a freakin awesome starting point tho - it runs really quite well...
since you have service ill need you to do some logcats and logcat -b radios. THe ril is close to hyc's but not identical because we arent using xdandroid. This is important since this part needs to be ironed out before moving to Cyanogen Mod. So gather some logs and see whats going on.

I got your donation so ill prob get a boost account again so this can be tested :-) thanks bro .. :headbang:

[ACL] 10-01-2011 09:55 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by muziling (Post 2148203)
step 1: place RHODIMG.NBH on the root of your SD card
step 2: power down the device completely
step 3: hold volume down and power till the screen boots into bootloader mode (red green blue screen)
step 4: when prompted press power to flash

Does i did wrong, step 4 not prompted me anything, seems I encount same problem with this:
http://forum.ppcgeeks.com/htc-touch-...-8gb-card.html

Does we can make an nbh file that support flash with USB

ACL, does git tinboot2.S and tinbootLK.S is the neweast, I want to try make an new NBH for usb flash method
need LK.BIN
Yep everything is up to date. To make your life easier, i can send you the lk.bin so all you need to do is clone tinboot. Just mod makelk.sh to a version that works for you and you will be good. PM me with your contact info so i can email it to you. its small.

[ACL] 10-01-2011 09:57 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by kozmo (Post 2148181)
WTG ACL!!! Got it to boot up, need to go back and install gapps...(just did)

When I reboot from recovery, I still get the "END CALL KEY was PRESSED... fastboot_init(), udc_start()" ... then have to remove battery to reboot. After that, booted fine.

Can we use the old root update zip?

Going to play with more, will report any findings
end call key is to get into fastboot mode. Power button is to get into recovery. Just making sure you got those right. If it freezes, then thats a bug ill look into.

arrrghhh 10-02-2011 01:50 AM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by [ACL] (Post 2148218)
since you have service ill need you to do some logcats and logcat -b radios. THe ril is close to hyc's but not identical because we arent using xdandroid. This is important since this part needs to be ironed out before moving to Cyanogen Mod. So gather some logs and see whats going on.

I got your donation so ill prob get a boost account again so this can be tested :-) thanks bro .. :headbang:
If I can help without you getting Boost, I wouldn't mind.

I sent you a logcat, logcat -b radio and a dmesg. Let me know if you want moar. I can certainly pull moar...

baalho 10-02-2011 11:31 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
omg..sweet...thanks for the sneak peak.

Will be extensively testing the thetering feature ;)

at

detule 10-03-2011 10:44 AM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
ACL,

I see OMGB and OMFGB on github - is there a project tree somewhere for the port to rhod_w?

[ACL] 10-03-2011 11:34 AM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by detule (Post 2148374)
ACL,

I see OMGB and OMFGB on github - is there a project tree somewhere for the port to rhod_w?
just for the device specific files.

https://github.com/acl/device_htc_rhodium

i need to push some latest changes but thats about it. Most of the work went into the sensors libs. Rest is old news..

ANything specific you wanna tackle? let me know and ill try to fill you in.

muziling 10-03-2011 12:35 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
1 Attachment(s)
with LK.BIN, now my NBH can be flash by USB.
same problem with arrrghhh, make a call, com.android.phone FC, and need to reboot, otherwise phone can't be use.

arrrghhh 10-03-2011 01:05 PM
Re: [DEV] - OMGB - 1.2.2{2.3.5} - CDMA ONLY
 
Quote:
Originally Posted by muziling (Post 2148395)
with LK.BIN, now my NBH can be flash by USB.
same problem with arrrghhh, make a call, com.android.phone FC, and need to reboot, otherwise phone can't be use.
Did you change anything in order to flash via USB?

Can you still flash via SD?

Would be nice if both methods worked, so that way people can use whatever method they prefer :D.

Oh, the RIL needs some lovin. Thanks for the logs, they should help ACL out!


All times are GMT -4. The time now is 04:58 AM.
Page 3 of 163 12 3 451353103 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0