Only use this method if stuck in bootloop or have errors installing froyo
☢Important Notes☢
* Applying SBF will perform a factory reset and wipe all data off your device
* I have tested this method and had no problems
To Apply SBF
1a. Download
RSD Lite
SBF INSTRUCTIONS: Install the RSDLite 4.7 program by double clicking on the program.
Move the pst_flash.ini file into the following folder --> Program Files/Motorola/RSDLite
1b. Download .604 update
HERE rename to update.zip and place in root of SDcard
1c. Download SBF from
HERE
2. Install the drivers that apply to your Operating System. (attached are Win 64 bit drivers)
3. Unzip the SBF into a folder.
4. Open RSD Lite and find the UNZIPPED SBF
5. Put your Motorola Droid X in bootloader mode (With Device off, Press Volume Down and camera buttons then press power). Now connect the Droid X via usb.
6. Click start and sit back.
7. Device will reboot automatically and you will need to remove battery to power down
To Apply .604
1. Press home button then power button to boot in recovery.
2. Press search key to show recover options
3. Use volume rocker to move down to "run update.zip"
4. Press okay
5. After completed scroll down to format device and click ok
6. After formats complete scroll up to reboot device
Use 1 Click Root
1. Download File droidxroot.zip from
HERE
2. Plug in droid x and set to pc mode
3. Made sure USB debugging is enabled (settings...applications...development)
4. Run 1 Click Root
5. You have to toggle bluetooth and press continue at same time (when it ask you to) Can try again if it doesn't work the first time
6. You can now Apply Froyo 2.2 Update