Post 2: SMS/MMS, GPS and Data
Data & Phone codes
Out of the box EnergyRom should be configured for our data, You do not need to install a USC Carrier Cab.
Update Roaming list
I do dial *228 and press talk and perform a roaming list update
Phone Codes
Phone Codes at the time of this guide I have not tested phone codes.
SMS & MMS
Out of the box SMS works but MMS does not.
MMS For Titanium, Manila 2.1 or Sense 2.1
Install apristel_Arcsoft MMS_USCellular_5_0_94_128c.cab (attached), soft reset.
*Note* If you get an error that the above cab will not install, then you will need to install "Remove PictureMail & Arcsoft.cab" (attached) first then soft reset. Then install the cab above.
You now have MMS
Here is the Server info for those of you who want it:
You can add a server via SMS / MMS > Options > MMS Options > Servers Tab > New
Enter the below info
Server name: usc
Gateway: left blank
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS
Connect via: Network
Send Limit: 500k
(if you have a WAP setting set to NONE)
MMS for Sense 2.5 (new build of 2.5 2011 have arcsoft built in)
Navigate to the Messaging Tab > All Messages > Menu > Settings > Options > Menu > MMS Server > + New
Enter the following settings
Server name: USC
Gateway: (Leave blank)
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example:
http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect Via:My ISP (or USC Or whatever your data connection is)
Send Limit: 1024 KB
WAP: None
Then click Done.
Set USC as Default. Soft Reset.
You will be able to send MMS using the HTC Messaging but to view MMS you will have to go to WM Messaging via Start > Internet > Messaging > SMS/MMS
MMS for EnergyROM Sense 2.5 Feb 1 Build Work Around
First off USC MMS just wont work with sense 2.5 (at least not that I can get it to work AND i have tried everything). But there are some work arounds that i have found that i now can get both Pic & Vid MMS.
First, set up your MMS Server in the HTC Messaging like this.
Navigate to the Messaging Tab > All Messages > Menu > Settings > Options > Menu > MMS Server > + New
Enter the following settings
Server name: USC
Gateway: (Leave blank)
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example:
http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect Via:My ISP (or USC Or whatever your data connection is)
Send Limit: 1024 KB
WAP: None
Then click Done.
Set USC as Default.
Next NRGZ has enabled Windows Mobile SMS/MMS as well. To access WM SMS/MMS go to Start > Internet > Messaging > SMS/MMS
OR if you have an email setup, click Email Tab > inbox then slide over to SMS/MMS
Second, Now Setup the WM Messaging MMS Server via Start > Internet > Messaging > SMS/MMS > Options > MMS Options > CDMA Servers Tab > New
Enter the below info
Server name: usc
Gateway: left blank
Port number: 80
Server address: http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=your 10 digit number here (example:
http://mmsc1.uscc.net/mmsc/MMS?X-USC-MDN=5415551234) *the server is CASE SENSITIVE enter in as shown*
Connect via: My ISP
Send Limit: 300k
Set USC as Default.
Third...
Now how this works. You can send PIC and MMS via HTC Messaging but you cannot view pic or vid MMS via HTC Messaging (you will get a text in HTC messaging but it will be blank and have no attachment).
You have to go to the WM SMS/MMS Start > Internet > Messaging > SMS/MMS) to view your pics and MMS just like you did on Sense 2.1
GPS Settings
Your location setting must be turn ON for GPS to work. For time to time some builds of EnergyROM this setting is set to OFF.
To turn on Location go to:
Start > Settings > Personal > Phone > Services > Location Setting > Get Settings > Turn ON
Soft Reset You will now have GPS.
QuickGPS - Is a program that can speed up the time for determining your GPS position by downloading the latest satellite data via data or internet connection.
EnergyROM has QuickGPS. You can run the program via Start > GPS > QuickGPS > Download